Clutch disc
 

I have rung the spines out of a clutch hub this week. After careful inspection, I have discovered that the disc I bought form Bonninfante has splines that are approx .300 long in the hub. I picked up a disc from Ram and measured the splines in their hub to be approx .420 long. I would like to just replace the hub on the disc without buying a new disc. The flywheel and PP show very little wear. Would like to swap hub for the thicker Ram piece.
Anyone try to mix hubs on discs?

Andy Stone
___________________________________________

1102 A/S 1112 SS/C

Re: Clutch disc
 

If it fits, wear it.

Re: Clutch disc
 

Call Tim Hyatt.......... 440 254 1311

Also........ http://www.umtrnorth.com/forums/default.asp

Re: Clutch disc
 

I did the same 10 years ago, sent both pieces to Ram, they switched hubs , not a big deal, thinking it was fairly inexpensive. but Tim Hyatt may be quicker and cheaper.

Re: Clutch disc
 

x-2

Re: Clutch disc
 

Appreciate the info. Thanks.


_________________________________________
Andy Stone
1102 A/S 1112 SS/C

Re: Clutch disc
 

i had McLeod change out a center not long ago. theirs was just bolted together. grade * bolts and stop nuts.
rod in AZ