|
|
![]() |
#2 |
VIP Member
Join Date: Oct 2008
Posts: 2,127
Likes: 1,084
Liked 184 Times in 113 Posts
|
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jul 2014
Posts: 569
Likes: 36
Liked 53 Times in 38 Posts
|
![]()
RedDevil Lye, drain opener. Very caustic so be careful, pore in slowly, it makes its own heat. Once the heat is gone, put a lid on it to seal for next use. Works better if heated. USE RUBBER GLOVES. Will clean and remove anything, rust, paint, grease. There are many different chemicals to use, depending on what you want done. I have large molasses, muriatic acid and electric tanks. Next is the stainless steel tank for the lye. Been Keeping an eye out at the recycle yard. Unbelievable what commercial restaurants throw away, I've found many large stainless buckets, pans for parts washing.
Mike Last edited by Coleydog; 01-07-2019 at 07:14 PM. |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Mar 2007
Posts: 346
Likes: 19
Liked 20 Times in 15 Posts
|
![]()
Heat makes chemistry work harder. Heated tanks are great. Buy your lye from a supplier as opposed to using drain cleaner. Not needing to be listed, don't know why, some lye based drain cleaners use heavy metals for a bigger kick, and are short lived. With a temp of 90+ try the Sam's club HD degreaser. Cheap and concentrated. If you plan on cleaning aluminum, lye and certain degreasers are a no-no.
|
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,473
Likes: 879
Liked 858 Times in 234 Posts
|
![]()
Coleydog got it with the Red Devil lye ….cheap and effective.
I've been using it for years since machine shops have been getting rid of their old caustic hot tanks. I use a large heavy duty 23 gallon storage tub with a bung installed on the side with an old oil pan heater element I had laying around in it . I try to keep the temp around 175-80 and I have a tube thru the cover that I can hook up to the air hose to aerate the mix and keep it cleaning. What ever you use for a container, if it's plastic make sure it will crush and deform , not crack .
__________________
Tom Goldman 1500 SG , 1506 STK |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Aug 2008
Posts: 137
Likes: 78
Liked 132 Times in 52 Posts
|
![]()
Lye to water ratio?
|
![]() |
![]() |
![]() |
|
|