Crankshaft Specialist Company, Mamphis Tn

John Duzac · 02-28-2010, 08:33 PM

I am looking for a company to hard chrome a stocker crankshaft. Has anyone had their crankshaft worked on by CrankShaft Spacialist in Mamphis, Tn? Any information will be greatful. It is better to ask for feedback before I send my crankshaft to someone that will not do a good job. Thanks,

John Duzac jd4446@bellsouth.net
(504)259-5935

Alkey Alex · 03-01-2010, 08:56 PM

John, you have pm......

rawhide · 03-01-2010, 09:13 PM

I used them years ago when Bobby Rowe ran it with excellent results but the internet shows a lot of complaints and lawsuits

Jim Bailey · 03-02-2010, 06:06 PM

Pretty tough to beat the quality of Mile High Crankshaft in Colorado. JB

John Duzac · 03-03-2010, 12:35 AM

Thanks to everyone who responded to my question. I would very much like to stick with a hard chrome crank. The crank I have now has been hard chromed and the bearings never need to be replaced. When rebuilding the engine, I just reuse the old bearings because they look like they just came out of the box. It is just that simple. Before having the crank hard chromed, I needed to change the rod bearings every 20 to 30 runs.

Greg Hill · 03-03-2010, 08:06 AM

John, call Kenny Faulk at 901-365-8010 and he should be able to give you some insight.

02-28-2010, 08:33 PM	#1
John Duzac Member Join Date: May 2005 Location: Covington, La Posts: 311 Likes: 63 Liked 83 Times in 20 Posts	Crankshaft Specialist Company, Mamphis Tn I am looking for a company to hard chrome a stocker crankshaft. Has anyone had their crankshaft worked on by CrankShaft Spacialist in Mamphis, Tn? Any information will be greatful. It is better to ask for feedback before I send my crankshaft to someone that will not do a good job. Thanks, John Duzac jd4446@bellsouth.net (504)259-5935 __________________ John Duzac D/S 4448 STK

03-01-2010, 08:56 PM	#2
Alkey Alex Member Join Date: Mar 2009 Location: Cape Girardeau, MO Posts: 275 Likes: 0 Liked 0 Times in 0 Posts	Re: Crankshaft Specialist Company, Mamphis Tn John, you have pm...... __________________ Alex Owens - STK - 3913 - Alkey Alex Photos & Stats http://alkeyalexphotos.weebly.com/ https://www.facebook.com/alkeyalexphotos

03-01-2010, 09:13 PM	#3
rawhide Member Join Date: Feb 2010 Posts: 270 Likes: 1 Liked 7 Times in 5 Posts	Re: Crankshaft Specialist Company, Mamphis Tn I used them years ago when Bobby Rowe ran it with excellent results but the internet shows a lot of complaints and lawsuits

03-02-2010, 06:06 PM	#4
Jim Bailey Senior Member Join Date: Aug 2004 Posts: 674 Likes: 15 Liked 584 Times in 94 Posts	Re: Crankshaft Specialist Company, Mamphis Tn Pretty tough to beat the quality of Mile High Crankshaft in Colorado. JB

03-03-2010, 12:35 AM	#5
John Duzac Member Join Date: May 2005 Location: Covington, La Posts: 311 Likes: 63 Liked 83 Times in 20 Posts	Re: Crankshaft Specialist Company, Memphis Tn Thanks to everyone who responded to my question. I would very much like to stick with a hard chrome crank. The crank I have now has been hard chromed and the bearings never need to be replaced. When rebuilding the engine, I just reuse the old bearings because they look like they just came out of the box. It is just that simple. Before having the crank hard chromed, I needed to change the rod bearings every 20 to 30 runs. __________________ John Duzac D/S 4448 STK

03-03-2010, 08:06 AM	#6
Greg Hill VIP Member Join Date: May 2006 Location: Louisville , KY Posts: 1,995 Likes: 68 Liked 279 Times in 68 Posts	Re: Crankshaft Specialist Company, Mamphis Tn John, call Kenny Faulk at 901-365-8010 and he should be able to give you some insight. __________________ Greg Hill 4171 STK