|
|
![]() |
#1 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,958 Times in 493 Posts
|
![]()
Not really a build but here is where we start... I've had a long run with my kids in jr dragsters and we're 1 season away from being totally aged out. Last season we decided to run NHRA divisionals since D2 opened it up to the kids just to see where we might land in the future. My kid isn't a dragster person so we knew a door car was in order and since I am just as happy working on a combo as driving and the near future would have her limited on racing due to life getting in the way I felt Stock would be a cheap(er) way to get an introduction to class. We looked at what was out there for almost a year, I looked at cheap and she looked at 69 Camaros, no way was I jumping in the deep end with no life jacket so here is what we ended up with. '76 H-I-J Nova 165/275 I picked it up some months ago, we have been pouring over, changing a few things we felt necessary, I'll be chronicling that here as we go.
__________________
Todd Greene |
![]() |
![]() |
Liked |
![]() |
#2 |
Senior Member
Join Date: Mar 2002
Location: NS CANADA
Posts: 759
Likes: 771
Liked 208 Times in 81 Posts
|
![]()
Good luck, can't wait to see the progress.
I'm in the same boat, kid is in his last year of jr and will be going to a full size next year. probably a bracket car for him unless I can finish the mustang.(how many years have I said that??) Anyway, post lots of pictures for those of us living vicariously lol! |
![]() |
![]() |
![]() |
#3 | |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,958 Times in 493 Posts
|
![]() Quote:
__________________
Todd Greene |
|
![]() |
![]() |
Liked |
![]() |
#4 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,958 Times in 493 Posts
|
![]()
So the first order of business was the roll bar, this car was built long ago and the door bars were so high into the door glass it was at the side of her face, so for safetys sake the door bars were replaced and I had them add an "X" down to the floor to strengthen near the front spring mounts. The original rear bars are far to the outside and support the rear spring mount.
![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Nov 2003
Location: BOSTON
Posts: 146
Likes: 23
Liked 25 Times in 9 Posts
|
![]()
Todd: Good luck my son has a Nova stocker and if we can be of any help feel free to reach out - Bob
|
![]() |
![]() |
Liked |
![]() |
#6 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,958 Times in 493 Posts
|
![]()
Thank you Bob, I just may do that. And a 68-72 Nova may be our stepping stone in the future. Oh and that's a beautiful car he has there!
__________________
Todd Greene |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Dec 2006
Location: Charlevoix, MI
Posts: 423
Likes: 94
Liked 87 Times in 34 Posts
|
![]()
My dad's old car. Glad to see it's still out there.
__________________
Bobby Lundholm 3516 G/SA |
![]() |
![]() |
![]() |
#8 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
Todd,
in one photo I see an engine air filter. When time allows, as an experiment, make a test run with the base plate only, no filter. Just curiosity, on my part. Also, I like the idea of the later Nova body. In addition, the photos of your Daughter working on the car are priceless. Tugs at my heart, it is a great happening and I strongly suggest you treasure each moment.
__________________
Larry Woodfin 471W |
![]() |
![]() |
Liked |
![]() |
#9 | |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,958 Times in 493 Posts
|
![]() Quote:
Yes I've been lucky enough to race with both my kids and I wouldn't give up those memories for anything in this world!
__________________
Todd Greene |
|
![]() |
![]() |
![]() |
#10 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,958 Times in 493 Posts
|
![]()
Everything in the car worked fine but finding multiple splices per wire is why we ended up here, more wiring today.
![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
|
|