2013 NHRA Rule Updates

Lew Silverman · 07-17-2013, 10:43 AM

Question answered, Thanks!

Jeff Lee · 07-17-2013, 11:00 AM

http://www.nhra.com/userfiles/file/2...%207-16-13.pdf

FED 387 · 07-17-2013, 11:40 AM

Guys--having trouble accessing NHRA site for "ACCEPTABLE PRODUCTS"---who other than Lokar is on the list for the header tethers?? Thanx FED 387

jmcarter · 07-17-2013, 02:34 PM

Quote:

Originally Posted by FED 387

Guys--having trouble accessing NHRA site for "ACCEPTABLE PRODUCTS"---who other than Lokar is on the list for the header tethers?? Thanx FED 387

I couldn't find any exhaust tethers listed, not even a section for it so no Lokar product there. Suspect they are getting ready to update the product listings.

jmcarter · 07-18-2013, 10:18 AM

NHRA updated the list today...here's the collector tether info..

Manufacturer
Part Number
Lokar
1400009
Lokar
1401009

Collector Tethers.com
Standard
Collector Tethers.com
Universal Kit

BTW, I couldn't find any such domain name searching Collector Tethers but perhaps its a start up business just getting set up...somebody on here will probably know about the product and update us

Andys dad · 07-18-2013, 01:25 PM

http://www.lokar.com/product-pgs/dra...tethering.html

Not mandatory until January 2014

Ron

Chuck Garey · 07-18-2013, 02:35 PM

Am i reading the last page right?, I need a trans shield?

Jim Kaekel · 07-18-2013, 03:09 PM

That's only a quick reference chart. Only when it is added into the Stock Eliminator section is when it becomes mandatory.

Lew Silverman · 07-18-2013, 04:18 PM

Chuck,

The Quick Reference chart lists Section 20 (General Regulations) Paragraph 2:14 Transmissions

All vehicles running quicker than 10.99 seconds (*6.99) or faster than
135 mph (except some Stock and Super Stock classes as noted
under Class Requirements) and using an automatic transmission
must be equipped with a transmission shield meeting SFI Spec 4.1
and labeled accordingly. (“Blanket”-type shield, appropriately
labeled as meeting SFI Spec 4.1, permitted.) All non-blanket-type
shields must incorporate two (or one, per manufacturer’s
instructions) 3/4 x 1/8-inch straps that bolt to the shield on each
side and pass under the transmission pan, or transmission pan
must be labeled as meeting SFI Spec 4.1. Permitted in all classes
where an automatic transmission is used.

There is no specific mention of a Automatic "transmission shield" in the Stock Class rules, Section 10A.

Lew

FED 387 · 07-18-2013, 06:42 PM

my experiennce in the past has been General regs override any of the class regulations UNLESS it specifically says something one way or the other!!! Better check to be sure ---The way I see it if your vehicle goes faster than X MPH or X ET you better have one

07-17-2013, 10:43 AM	#1
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	2013 NHRA Rule Updates Question answered, Thanks! __________________ Lew Silverman #2070 "The Wagon Master" N/SA Last edited by Lew Silverman; 07-18-2013 at 04:06 PM. Reason: Question answered!

07-17-2013, 11:00 AM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: 2013 NHRA Rule Updates http://www.nhra.com/userfiles/file/2...%207-16-13.pdf __________________ Jeff Lee 7494 D/S '70 AMX

07-17-2013, 11:40 AM	#3
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,416 Likes: 521 Liked 330 Times in 178 Posts	Re: 2013 NHRA Rule Updates Guys--having trouble accessing NHRA site for "ACCEPTABLE PRODUCTS"---who other than Lokar is on the list for the header tethers?? Thanx FED 387

07-18-2013, 10:18 AM	#5
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,293 Likes: 2,367 Liked 3,165 Times in 969 Posts	Re: 2013 NHRA Rule Updates NHRA updated the list today...here's the collector tether info.. Manufacturer Part Number Lokar 1400009 Lokar 1401009 Collector Tethers.com Standard Collector Tethers.com Universal Kit BTW, I couldn't find any such domain name searching Collector Tethers but perhaps its a start up business just getting set up...somebody on here will probably know about the product and update us __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table Last edited by jmcarter; 07-18-2013 at 10:22 AM.

07-18-2013, 01:25 PM	#6
Andys dad VIP Member Join Date: Aug 2006 Location: Arcadia, Ca Posts: 1,571 Likes: 48 Liked 175 Times in 78 Posts	Re: 2013 NHRA Rule Updates http://www.lokar.com/product-pgs/dra...tethering.html Not mandatory until January 2014 Ron __________________ time is our most precious resource, you can always make more money but you can never make more time spend your time wisely with the ones you love - Ron Durham

07-18-2013, 02:35 PM	#7
Chuck Garey Member Join Date: Mar 2002 Location: Texas Posts: 173 Likes: 0 Liked 10 Times in 7 Posts	Re: 2013 NHRA Rule Updates Am i reading the last page right?, I need a trans shield?

07-18-2013, 03:09 PM	#8
Jim Kaekel VIP Member Join Date: Jul 2002 Location: Michigan Posts: 1,226 Likes: 133 Liked 529 Times in 107 Posts	Re: 2013 NHRA Rule Updates That's only a quick reference chart. Only when it is added into the Stock Eliminator section is when it becomes mandatory. __________________ Jim Kaekel 3836 STK

07-18-2013, 04:18 PM	#9
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	Re: 2013 NHRA Rule Updates Chuck, The Quick Reference chart lists Section 20 (General Regulations) Paragraph 2:14 Transmissions All vehicles running quicker than 10.99 seconds (*6.99) or faster than 135 mph (except some Stock and Super Stock classes as noted under Class Requirements) and using an automatic transmission must be equipped with a transmission shield meeting SFI Spec 4.1 and labeled accordingly. (“Blanket”-type shield, appropriately labeled as meeting SFI Spec 4.1, permitted.) All non-blanket-type shields must incorporate two (or one, per manufacturer’s instructions) 3/4 x 1/8-inch straps that bolt to the shield on each side and pass under the transmission pan, or transmission pan must be labeled as meeting SFI Spec 4.1. Permitted in all classes where an automatic transmission is used. There is no specific mention of a Automatic "transmission shield" in the Stock Class rules, Section 10A. Lew __________________ Lew Silverman #2070 "The Wagon Master" N/SA

07-18-2013, 06:42 PM	#10
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,416 Likes: 521 Liked 330 Times in 178 Posts	Re: 2013 NHRA Rule Updates my experiennce in the past has been General regs override any of the class regulations UNLESS it specifically says something one way or the other!!! Better check to be sure ---The way I see it if your vehicle goes faster than X MPH or X ET you better have one