do these headers look familiar?

L79racer · 10-15-2007, 05:01 PM

I got these headers and other parts with a 57 chevy. I dont know what they fit. Looks like the are stepped from 1 3/4 to 1 7/8 to 2 inch. The have the bungs I guess for egt sensors in each tube. I will probably try and sell them because I dont think I can use them. Let me know if you think you know what car them might fit.

rx dealer · 10-17-2007, 10:02 AM

I think...maybe 82-92 camaro-firebird???...luke

Ron Middleton · 10-17-2007, 05:22 PM

Look like Schoenfeld G-body headers that have had primaries extended. Part number 185v. JMT.

Dave Goob Cook · 10-18-2007, 07:20 AM

I would agree that the passenger side header looks like a large tube Camaro/Nova/G-Body piece......

James Perrone · 10-18-2007, 10:53 AM

Look like DAVIS headers For Nova Camaro..Are you located on L.I.?

Wade_Owens · 10-18-2007, 12:32 PM

i have looked at the pics several times. i looked at my car last night, i'm pretty sure these are 66-67 chevelle headers. the tube location and how they are paired at the collector are just like mine. some companys put a part number on the top of one of the flanges, after coating, it gets harder to read. good luck,

wade o

L79racer · 10-18-2007, 06:17 PM

Thanks for repling guys. I looked at the Shoenfeld headers. The one drivers side header look similar but not the passenger side. I tried to look up davis headers but I didnt come up with a web site. Does Davis have one? I wish I could use them. They are really nice made headers.

Yes James, I'm on Long Island.

Wade, whos headers do you have?

Jeff Goss · 10-18-2007, 07:53 PM

I have a set that look identical to those. No markings on them. I bought them advertised as being for a G-body.

They do not fit an early (64) Chevelle, or my 81 G-body.

I would be interested to know what yours end up going to.

Jeff

L79racer · 10-19-2007, 07:02 PM

Jeff, if you can, post a couple of pictures of your headers. I dont think they are home made. They look to good and look like they were made with a jig. I hope somebody can figure out who makes them.

Vinny

Jeff Goss · 10-19-2007, 07:39 PM

Vinny,

Can't post pics-not sure why.....

After looking at mine, the tubes for cylinders 5 and 6 come back farther toward the firewall on mine than yours do. This was the place they hit in the cars I have tried. I also tried a 67 Camaro-no luck.

Mine are stepped 1 5/8 to 1 3/4 to 1 7/8 with a 3.5 inch collector.

I would sell mine as well, if I could figure out what they fit.....

Jeff
6990 SS/MA
64 Chevelle Wagon

10-15-2007, 05:01 PM	#1
L79racer Member Join Date: Jan 2005 Location: North Massapequa, NY Posts: 218 Likes: 0 Liked 0 Times in 0 Posts	do these headers look familiar? I got these headers and other parts with a 57 chevy. I dont know what they fit. Looks like the are stepped from 1 3/4 to 1 7/8 to 2 inch. The have the bungs I guess for egt sensors in each tube. I will probably try and sell them because I dont think I can use them. Let me know if you think you know what car them might fit.

10-17-2007, 10:02 AM	#2
rx dealer Member Join Date: Mar 2007 Location: Lake Orion, Michigan Posts: 337 Likes: 12 Liked 53 Times in 13 Posts	Re: do these headers look familiar? I think...maybe 82-92 camaro-firebird???...luke

10-17-2007, 05:22 PM	#3
Ron Middleton Member Join Date: Jan 1970 Location: Jackson, Ms. Posts: 350 Likes: 183 Liked 12 Times in 4 Posts	Re: do these headers look familiar? Look like Schoenfeld G-body headers that have had primaries extended. Part number 185v. JMT.

10-18-2007, 07:20 AM	#4
Dave Goob Cook Member Join Date: Dec 2006 Location: Indy Posts: 422 Likes: 0 Liked 0 Times in 0 Posts	Re: do these headers look familiar? I would agree that the passenger side header looks like a large tube Camaro/Nova/G-Body piece......

10-18-2007, 10:53 AM	#5
James Perrone VIP Member Join Date: Feb 2004 Location: LONG ISLAND N.Y. Posts: 1,669 Likes: 3,359 Liked 1,804 Times in 422 Posts	Re: do these headers look familiar? Look like DAVIS headers For Nova Camaro..Are you located on L.I.? __________________ james perrone 1290 STK

10-18-2007, 12:32 PM	#6
Wade_Owens Senior Member Join Date: Jul 2007 Posts: 578 Likes: 0 Liked 3 Times in 1 Post	Re: do these headers look familiar? i have looked at the pics several times. i looked at my car last night, i'm pretty sure these are 66-67 chevelle headers. the tube location and how they are paired at the collector are just like mine. some companys put a part number on the top of one of the flanges, after coating, it gets harder to read. good luck, wade o

10-18-2007, 06:17 PM	#7
L79racer Member Join Date: Jan 2005 Location: North Massapequa, NY Posts: 218 Likes: 0 Liked 0 Times in 0 Posts	Re: do these headers look familiar? Thanks for repling guys. I looked at the Shoenfeld headers. The one drivers side header look similar but not the passenger side. I tried to look up davis headers but I didnt come up with a web site. Does Davis have one? I wish I could use them. They are really nice made headers. Yes James, I'm on Long Island. Wade, whos headers do you have? Last edited by L79racer; 10-19-2007 at 06:59 PM.

10-18-2007, 07:53 PM	#8
Jeff Goss Member Join Date: Nov 2001 Location: Burlington, WA Posts: 361 Likes: 1 Liked 0 Times in 0 Posts	Re: do these headers look familiar? I have a set that look identical to those. No markings on them. I bought them advertised as being for a G-body. They do not fit an early (64) Chevelle, or my 81 G-body. I would be interested to know what yours end up going to. Jeff

10-19-2007, 07:02 PM	#9
L79racer Member Join Date: Jan 2005 Location: North Massapequa, NY Posts: 218 Likes: 0 Liked 0 Times in 0 Posts	Re: do these headers look familiar? Jeff, if you can, post a couple of pictures of your headers. I dont think they are home made. They look to good and look like they were made with a jig. I hope somebody can figure out who makes them. Vinny

10-19-2007, 07:39 PM	#10
Jeff Goss Member Join Date: Nov 2001 Location: Burlington, WA Posts: 361 Likes: 1 Liked 0 Times in 0 Posts	Re: do these headers look familiar? Vinny, Can't post pics-not sure why..... After looking at mine, the tubes for cylinders 5 and 6 come back farther toward the firewall on mine than yours do. This was the place they hit in the cars I have tried. I also tried a 67 Camaro-no luck. Mine are stepped 1 5/8 to 1 3/4 to 1 7/8 with a 3.5 inch collector. I would sell mine as well, if I could figure out what they fit..... Jeff 6990 SS/MA 64 Chevelle Wagon Last edited by Jeff Goss; 10-19-2007 at 09:45 PM. Reason: try to post pics