do these headers look familiar?
 

I got these headers and other parts with a 57 chevy. I dont know what they fit. Looks like the are stepped from 1 3/4 to 1 7/8 to 2 inch. The have the bungs I guess for egt sensors in each tube. I will probably try and sell them because I dont think I can use them. Let me know if you think you know what car them might fit.

http://i24.tinypic.com/1j93me.jpg

http://i24.tinypic.com/2h39729.jpg

http://i21.tinypic.com/11jlurl.jpg

Re: do these headers look familiar?
 

I think...maybe 82-92 camaro-firebird???...luke

Re: do these headers look familiar?
 

Look like Schoenfeld G-body headers that have had primaries extended. Part number 185v. JMT.

Re: do these headers look familiar?
 

I would agree that the passenger side header looks like a large tube Camaro/Nova/G-Body piece......

Re: do these headers look familiar?
 

Look like DAVIS headers For Nova Camaro..Are you located on L.I.?

Re: do these headers look familiar?
 

i have looked at the pics several times. i looked at my car last night, i'm pretty sure these are 66-67 chevelle headers. the tube location and how they are paired at the collector are just like mine. some companys put a part number on the top of one of the flanges, after coating, it gets harder to read. good luck,

wade o

Re: do these headers look familiar?
 

Thanks for repling guys. I looked at the Shoenfeld headers. The one drivers side header look similar but not the passenger side. I tried to look up davis headers but I didnt come up with a web site. Does Davis have one? I wish I could use them. They are really nice made headers.

Yes James, I'm on Long Island.

Wade, whos headers do you have?

Re: do these headers look familiar?
 

I have a set that look identical to those. No markings on them. I bought them advertised as being for a G-body.

They do not fit an early (64) Chevelle, or my 81 G-body.

I would be interested to know what yours end up going to.

Jeff

Re: do these headers look familiar?
 

Jeff, if you can, post a couple of pictures of your headers. I dont think they are home made. They look to good and look like they were made with a jig. I hope somebody can figure out who makes them.

Vinny

Re: do these headers look familiar?
 

Vinny,

Can't post pics-not sure why.....

After looking at mine, the tubes for cylinders 5 and 6 come back farther toward the firewall on mine than yours do. This was the place they hit in the cars I have tried. I also tried a 67 Camaro-no luck.

Mine are stepped 1 5/8 to 1 3/4 to 1 7/8 with a 3.5 inch collector.

I would sell mine as well, if I could figure out what they fit.....

Jeff
6990 SS/MA
64 Chevelle Wagon