Clutch disc

Stick Racing · 03-18-2012, 04:06 PM

I have rung the spines out of a clutch hub this week. After careful inspection, I have discovered that the disc I bought form Bonninfante has splines that are approx .300 long in the hub. I picked up a disc from Ram and measured the splines in their hub to be approx .420 long. I would like to just replace the hub on the disc without buying a new disc. The flywheel and PP show very little wear. Would like to swap hub for the thicker Ram piece.
Anyone try to mix hubs on discs?

Andy Stone
___________________________________________

1102 A/S 1112 SS/C

Dwight Southerland · 03-18-2012, 04:11 PM

If it fits, wear it.

Steve Hayward · 03-18-2012, 04:17 PM

Call Tim Hyatt.......... 440 254 1311

Also........ http://www.umtrnorth.com/forums/default.asp

JHeath · 03-18-2012, 10:20 PM

I did the same 10 years ago, sent both pieces to Ram, they switched hubs , not a big deal, thinking it was fairly inexpensive. but Tim Hyatt may be quicker and cheaper.

Greg Barsamian · 03-19-2012, 07:06 AM

Quote:

Originally Posted by steve hayward

call tim hyatt.......... 440 254 1311

also........ http://www.umtrnorth.com/forums/default.asp

x-2

Stick Racing · 03-19-2012, 04:32 PM

Appreciate the info. Thanks.

_________________________________________
Andy Stone
1102 A/S 1112 SS/C

rod · 03-21-2012, 09:36 PM

i had McLeod change out a center not long ago. theirs was just bolted together. grade * bolts and stop nuts.
rod in AZ

03-18-2012, 04:06 PM	#1
Stick Racing Member Join Date: Mar 2007 Posts: 169 Likes: 4 Liked 0 Times in 0 Posts	Clutch disc I have rung the spines out of a clutch hub this week. After careful inspection, I have discovered that the disc I bought form Bonninfante has splines that are approx .300 long in the hub. I picked up a disc from Ram and measured the splines in their hub to be approx .420 long. I would like to just replace the hub on the disc without buying a new disc. The flywheel and PP show very little wear. Would like to swap hub for the thicker Ram piece. Anyone try to mix hubs on discs? Andy Stone ___________________________________________ 1102 A/S 1112 SS/C

03-18-2012, 04:11 PM	#2
Dwight Southerland VIP Member Join Date: Dec 2001 Location: Arkansas - In the middle of everything. Posts: 1,999 Likes: 64 Liked 772 Times in 192 Posts	Re: Clutch disc If it fits, wear it.

03-18-2012, 04:17 PM	#3
Steve Hayward Junior Member Join Date: Jul 2003 Location: Canada Posts: 39 Likes: 0 Liked 0 Times in 0 Posts	Re: Clutch disc Call Tim Hyatt.......... 440 254 1311 Also........ http://www.umtrnorth.com/forums/default.asp

03-18-2012, 10:20 PM	#4
JHeath Senior Member Join Date: Jul 2004 Location: Minneapolis Posts: 786 Likes: 2,876 Liked 370 Times in 101 Posts	Re: Clutch disc I did the same 10 years ago, sent both pieces to Ram, they switched hubs , not a big deal, thinking it was fairly inexpensive. but Tim Hyatt may be quicker and cheaper. __________________ Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ"

03-19-2012, 04:32 PM	#6
Stick Racing Member Join Date: Mar 2007 Posts: 169 Likes: 4 Liked 0 Times in 0 Posts	Re: Clutch disc Appreciate the info. Thanks. _________________________________________ Andy Stone 1102 A/S 1112 SS/C

03-21-2012, 09:36 PM	#7
rod Member Join Date: Dec 2009 Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66 Posts: 314 Likes: 0 Liked 20 Times in 15 Posts	Re: Clutch disc i had McLeod change out a center not long ago. theirs was just bolted together. grade * bolts and stop nuts. rod in AZ