General ???? about the Drag Pak cars

FED 387 · 03-25-2011, 07:43 PM

Just for my own information when a DP vehicle is purchased where do you go to pick it up??? Is it delivered by a typical car hauler that delivers other new cars?? The dealer you ordered it thru, a distribution place , a select dealership, the factory, where??? Does this car run so that you can start it up & drive it around to like in front of a trailer to load it up or is it just a bunch of parts put together and you push it from one place to another??? What kind of trans do the stick & auto transmission cars have??? Read about them but they are not to clear about some of these area--I know it sounds kinda stupid but inquiring minds want to know---Thankx Comp

CBS · 03-25-2011, 08:58 PM

Mr Jeff should be able to fill you in......I believe it depends on the year.....

denbreeden · 03-25-2011, 10:32 PM

You have to pick them up at Roush Racing. The 2009 and 2010's were not running cars, you had to pick them up in an enclosed trailer. No transmission and a boat trailer for the rear axle. 2011's are V-10 powered, complete running cars.

Ed Fernandez · 03-25-2011, 10:45 PM

What rear end do the V-10 cars come with?

denbreeden · 03-25-2011, 11:10 PM

8 3/4 center section in a modified 9" housing.

denbreeden · 03-25-2011, 11:17 PM

http://www.mopar.com/assets/pdf/perf...spec_sheet.pdf

Here's the info on the 2011's.

MPR · 03-25-2011, 11:32 PM

Quote:

Originally Posted by denbreeden

8 3/4 center section in a modified 9" housing.

All 2011 Drag Paks come from the factory with a Strange Nine Inch rear axle assembly Mopar P/N P5155850. No Drag Paks came from the factory with an 8 3/4. 2009 Drag Paks had an independent rear suspension cradle with no diff and 2010s had a trailer axle for transportation purposes only. Several racers equipped their 2009 and 2010 Drag Paks with 8 3/4 or Strange/Dana 60 rear axle assemblies but the factory never installed any rear diff in a Drag Pak Challenger until 2011.

Ed Fernandez · 03-26-2011, 12:20 AM

Quote:

Originally Posted by MPR

All 2011 Drag Paks come from the factory with a Strange Nine Inch rear axle assembly Mopar P/N P5155850. No Drag Paks came from the factory with an 8 3/4. 2009 Drag Paks had an independent rear suspension cradle with no diff and 2010s had a trailer axle for transportation purposes only. Several racers equipped their 2009 and 2010 Drag Paks with 8 3/4 or Strange/Dana 60 rear axle assemblies but the factory never installed any rear diff in a Drag Pak Challenger until 2011.

Thank you.

dragracer502 · 03-26-2011, 12:47 AM

Hang on a second......Ed, you didnt know something about a Stocker? Glad my calander is near by

Phillip marvetz · 03-26-2011, 02:20 AM

Quote:

Originally Posted by dragracer502

Hang on a second......Ed, you didnt know something about a Stocker? Glad my calander is near by

Well now, A strange 9 inch has a Mopar part number. That makes it a corprate assembly. Mopar's and Amc stocker's can now run a 9 inch. Your pretty smart Ed.

03-25-2011, 07:43 PM	#1
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,409 Likes: 505 Liked 329 Times in 177 Posts	General ???? about the Drag Pak cars Just for my own information when a DP vehicle is purchased where do you go to pick it up??? Is it delivered by a typical car hauler that delivers other new cars?? The dealer you ordered it thru, a distribution place , a select dealership, the factory, where??? Does this car run so that you can start it up & drive it around to like in front of a trailer to load it up or is it just a bunch of parts put together and you push it from one place to another??? What kind of trans do the stick & auto transmission cars have??? Read about them but they are not to clear about some of these area--I know it sounds kinda stupid but inquiring minds want to know---Thankx Comp

03-25-2011, 08:58 PM	#2
CBS VIP Member Join Date: Oct 2002 Location: Commerce, Mi Posts: 1,387 Likes: 1 Liked 4 Times in 2 Posts	Re: General ???? about the Drag Pak cars Mr Jeff should be able to fill you in......I believe it depends on the year.....

03-25-2011, 10:32 PM	#3
denbreeden Senior Member Join Date: Jul 2010 Location: Plainville, IN Posts: 501 Likes: 147 Liked 61 Times in 26 Posts	Re: General ???? about the Drag Pak cars You have to pick them up at Roush Racing. The 2009 and 2010's were not running cars, you had to pick them up in an enclosed trailer. No transmission and a boat trailer for the rear axle. 2011's are V-10 powered, complete running cars.

03-25-2011, 10:45 PM	#4
Ed Fernandez Veteran Member Join Date: Nov 2001 Location: NOO JOISEY nexta NOO YAWK Posts: 5,879 Likes: 38 Liked 100 Times in 45 Posts	Re: General ???? about the Drag Pak cars What rear end do the V-10 cars come with? __________________ Former NHRA #1945 Former IHRA #1945 T/SA

03-25-2011, 11:10 PM	#5
denbreeden Senior Member Join Date: Jul 2010 Location: Plainville, IN Posts: 501 Likes: 147 Liked 61 Times in 26 Posts	Re: General ???? about the Drag Pak cars 8 3/4 center section in a modified 9" housing.

03-25-2011, 11:17 PM	#6
denbreeden Senior Member Join Date: Jul 2010 Location: Plainville, IN Posts: 501 Likes: 147 Liked 61 Times in 26 Posts	Re: General ???? about the Drag Pak cars http://www.mopar.com/assets/pdf/perf...spec_sheet.pdf Here's the info on the 2011's.

03-26-2011, 12:47 AM	#9
dragracer502 Member Join Date: Nov 2008 Posts: 163 Likes: 6 Liked 10 Times in 8 Posts	Re: General ???? about the Drag Pak cars Hang on a second......Ed, you didnt know something about a Stocker? Glad my calander is near by