CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   General ???? about the Drag Pak cars (https://classracer.com/classforum/showthread.php?t=32367)

FED 387 03-25-2011 07:43 PM

General ???? about the Drag Pak cars
 
Just for my own information when a DP vehicle is purchased where do you go to pick it up??? Is it delivered by a typical car hauler that delivers other new cars?? The dealer you ordered it thru, a distribution place , a select dealership, the factory, where??? Does this car run so that you can start it up & drive it around to like in front of a trailer to load it up or is it just a bunch of parts put together and you push it from one place to another??? What kind of trans do the stick & auto transmission cars have??? Read about them but they are not to clear about some of these area--I know it sounds kinda stupid but inquiring minds want to know---Thankx Comp

CBS 03-25-2011 08:58 PM

Re: General ???? about the Drag Pak cars
 
Mr Jeff should be able to fill you in......I believe it depends on the year.....

denbreeden 03-25-2011 10:32 PM

Re: General ???? about the Drag Pak cars
 
You have to pick them up at Roush Racing. The 2009 and 2010's were not running cars, you had to pick them up in an enclosed trailer. No transmission and a boat trailer for the rear axle. 2011's are V-10 powered, complete running cars.

Ed Fernandez 03-25-2011 10:45 PM

Re: General ???? about the Drag Pak cars
 
What rear end do the V-10 cars come with?

denbreeden 03-25-2011 11:10 PM

Re: General ???? about the Drag Pak cars
 
8 3/4 center section in a modified 9" housing.

denbreeden 03-25-2011 11:17 PM

Re: General ???? about the Drag Pak cars
 
http://www.mopar.com/assets/pdf/perf...spec_sheet.pdf

Here's the info on the 2011's.

MPR 03-25-2011 11:32 PM

Re: General ???? about the Drag Pak cars
 
Quote:

Originally Posted by denbreeden (Post 248706)
8 3/4 center section in a modified 9" housing.

All 2011 Drag Paks come from the factory with a Strange Nine Inch rear axle assembly Mopar P/N P5155850. No Drag Paks came from the factory with an 8 3/4. 2009 Drag Paks had an independent rear suspension cradle with no diff and 2010s had a trailer axle for transportation purposes only. Several racers equipped their 2009 and 2010 Drag Paks with 8 3/4 or Strange/Dana 60 rear axle assemblies but the factory never installed any rear diff in a Drag Pak Challenger until 2011.

Ed Fernandez 03-26-2011 12:20 AM

Re: General ???? about the Drag Pak cars
 
Quote:

Originally Posted by MPR (Post 248711)
All 2011 Drag Paks come from the factory with a Strange Nine Inch rear axle assembly Mopar P/N P5155850. No Drag Paks came from the factory with an 8 3/4. 2009 Drag Paks had an independent rear suspension cradle with no diff and 2010s had a trailer axle for transportation purposes only. Several racers equipped their 2009 and 2010 Drag Paks with 8 3/4 or Strange/Dana 60 rear axle assemblies but the factory never installed any rear diff in a Drag Pak Challenger until 2011.

Thank you.

dragracer502 03-26-2011 12:47 AM

Re: General ???? about the Drag Pak cars
 
Hang on a second......Ed, you didnt know something about a Stocker? Glad my calander is near by

Phillip marvetz 03-26-2011 02:20 AM

Re: General ???? about the Drag Pak cars
 
Quote:

Originally Posted by dragracer502 (Post 248715)
Hang on a second......Ed, you didnt know something about a Stocker? Glad my calander is near by

Well now, A strange 9 inch has a Mopar part number. That makes it a corprate assembly. Mopar's and Amc stocker's can now run a 9 inch. Your pretty smart Ed.


All times are GMT -4. The time now is 03:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.