|
|
06-09-2010, 08:42 PM
|
#1 |
|
Member
Join Date: Apr 2006
Location: canada
Posts: 251
Likes: 28
Liked 84 Times in 21 Posts
|
fuel cell venting
I'm installing an aluminum cell in the stocker and looking for some thoughts on venting. The cell has the rollover vent manufacturer installed. Can I use a 180 degree fitting on the rollover vent and go straight down with line or do I need a loop in the line just above the cell? Any other thoughts? Thanks Doug
|
|
|
|
06-10-2010, 07:22 PM
|
#2 |
|
Junior Member
Join Date: Feb 2008
Posts: 76
Likes: 21
Liked 20 Times in 3 Posts
|
Re: fuel cell venting
Mine comes out with a 90 degree elbow then straight down through the trunk.
|
|
|
|
|
06-11-2010, 12:41 AM
|
#3 |
|
VIP Member
Join Date: Jan 2003
Location: jackson
Posts: 1,165
Likes: 0
Liked 5 Times in 3 Posts
|
Re: fuel cell venting
same way mine is a 90 then down....one of those deals do what ya want
__________________
Greg Fulk 308 308X P/SA "ALL AMERICAN" |
|
|
|
|
06-11-2010, 08:33 AM
|
#4 |
|
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 390 Times in 170 Posts
|
Re: fuel cell venting
Mine goes outside the trunk (it's sitting in the tee-top storage well), then above the fuel cell, then across the car and back just in case it ended up laying one side or the other.
__________________
Ed Wright 4156 SS/JA |
|
|
|
|
06-11-2010, 11:11 AM
|
#5 |
|
Member
Join Date: Dec 2009
Location: Clinton, OH
Posts: 106
Likes: 0
Liked 5 Times in 3 Posts
|
Re: fuel cell venting
If you vent if anywhere under the car be sure to cover the outlet of it with a small K&N (or equivalent) filter or breather to keep "stuff" from finding its way into the cell and into your fuel system
|
|
|
|
 |
|
|
Linear Mode
