fuel cell venting
 

I'm installing an aluminum cell in the stocker and looking for some thoughts on venting. The cell has the rollover vent manufacturer installed. Can I use a 180 degree fitting on the rollover vent and go straight down with line or do I need a loop in the line just above the cell? Any other thoughts? Thanks Doug

Re: fuel cell venting
 

Mine comes out with a 90 degree elbow then straight down through the trunk.

Re: fuel cell venting
 

same way mine is a 90 then down....one of those deals do what ya want ;)

Re: fuel cell venting
 

Mine goes outside the trunk (it's sitting in the tee-top storage well), then above the fuel cell, then across the car and back just in case it ended up laying one side or the other.

Re: fuel cell venting
 

If you vent if anywhere under the car be sure to cover the outlet of it with a small K&N (or equivalent) filter or breather to keep "stuff" from finding its way into the cell and into your fuel system