CLASS RACER FORUM - View Single Post - Winters Shifter Adjustment...is killing me!!

Project 392 · 11-03-2020, 08:05 PM

Something I have run into in the past that I don't see mentioned. Shifter cable HOUSING adjustment between mounting points. Think the dirt bike throttle cable you had as a kid. If the cable has an adjustable end in one bracket, the slack in the inner cable can be taken out. Happened to me on a Fairbanks shifter and one other that I don't remember. FWIW, I start my checking adjustments in 2nd gear (3sp r.m.v.b.) R,N,1st fall on the trans detents and don;t seem to be as critical as 2 and 3. I make sure that 3rd is precise. I have in the past made brackets to bolt to the trans shift arm to move the ball stud up down or sideways. Hope this is of some help.

Victor in Kingman

11-03-2020, 08:05 PM	#18
Project 392 Junior Member Join Date: Mar 2018 Posts: 40 Likes: 196 Liked 26 Times in 15 Posts	Re: Winters Shifter Adjustment...is killing me!! Something I have run into in the past that I don't see mentioned. Shifter cable HOUSING adjustment between mounting points. Think the dirt bike throttle cable you had as a kid. If the cable has an adjustable end in one bracket, the slack in the inner cable can be taken out. Happened to me on a Fairbanks shifter and one other that I don't remember. FWIW, I start my checking adjustments in 2nd gear (3sp r.m.v.b.) R,N,1st fall on the trans detents and don;t seem to be as critical as 2 and 3. I make sure that 3rd is precise. I have in the past made brackets to bolt to the trans shift arm to move the ball stud up down or sideways. Hope this is of some help. Victor in Kingman Last edited by Project 392; 11-03-2020 at 08:07 PM.