Quote:
Originally Posted by rod
I was just weighting a set of rods [I beam small journal 327 SBC], reconed by the machine shop. all are within 1/2 a gram except one which is 2 grams light. [has to be on the big end, cause the small end has nothing to loose].
what is the acceptable +/- spread?
thanks
Rod in AZ
|
What is meant by the small end has nothing to loose ??? Both ends should be weighed to see which end is out.
That being said I see alot of the GM crate circle track engines and have seen rods per set off as much as 8 grams and those engine run for years with zero problems and look very good when disassembled.
You should be fine.