CLASS RACER FORUM - View Single Post - Front Suspension G-Body

Kegracing · 06-06-2015, 04:45 PM

CAUTION... I have cut several pairs of Moroso springs over the years. Good springs for the price and work much better than stock. BUT they always settle a little with some use. Leave them a little longer - read sitting higher, than you want for final. 1/2 - 3/4" inch higher than what you want for final static height.

Know it is a pain in the butt to pull them out and cut a little and put back, but you can not add coils back if you cut too much.

Also, never use a torch to cut. Saw or cutoff wheel. Heat from torch will kill them.

Be careful and good luck.

Ken

Stock 412

06-06-2015, 04:45 PM	#5
Kegracing Member Join Date: Jun 2002 Location: Red Oak, TX Posts: 441 Likes: 0 Liked 0 Times in 0 Posts	Re: Front Suspension G-Body CAUTION... I have cut several pairs of Moroso springs over the years. Good springs for the price and work much better than stock. BUT they always settle a little with some use. Leave them a little longer - read sitting higher, than you want for final. 1/2 - 3/4" inch higher than what you want for final static height. Know it is a pain in the butt to pull them out and cut a little and put back, but you can not add coils back if you cut too much. Also, never use a torch to cut. Saw or cutoff wheel. Heat from torch will kill them. Be careful and good luck. Ken Stock 412