CLASS RACER FORUM - View Single Post - Comp Cam Break-in Lube (Part # 159-12)

Jeff Lee · 05-16-2010, 05:04 PM

Ray,
Are you talking about your roller cam SS/CS engine or something else? Because you don't need anything but oil for a roller.
If it's a flat tappet, get a hold of me as my shop has coatings to the cam and lifters. They have completed R&D and will soon be released. You can have race springs installed (460#'s +) and start the engine up and let it idle. No break in, no spring changes required. Applied to your parts or custom built from the shop. You can call me @ 602-418-9797.
Jeff

05-16-2010, 05:04 PM	#6
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Comp Cam Break-in Lube (Part # 159-12) Ray, Are you talking about your roller cam SS/CS engine or something else? Because you don't need anything but oil for a roller. If it's a flat tappet, get a hold of me as my shop has coatings to the cam and lifters. They have completed R&D and will soon be released. You can have race springs installed (460#'s +) and start the engine up and let it idle. No break in, no spring changes required. Applied to your parts or custom built from the shop. You can call me @ 602-418-9797. Jeff __________________ Jeff Lee 7494 D/S '70 AMX