PCV oil Seperator in stock?
 

Can a PCV/Air seperator be installed between valve cover and intake manifold. Wanting to keep oil from contaminating intake.

Re: PCV oil Seperator in stock?
 

on my 400 mopar stocker i run the PVC off the intake not carb, so it only does 1 cylinder

Re: PCV oil Seperator in stock?
 

Run it off a carb spacer if you have one.

Re: PCV oil Seperator in stock?
 

I used to use 1 on my Cleveland. I'm not sure on the legality in Stock but I took it off because there was never any oil in the bowl to drain out. It was on the engine for a few years.

Re: PCV oil Seperator in stock?
 

Jeff, I have seen it all in my over 40 years of running stock eliminator. Pcv, master cylinder one way valves, they are all legal.

Re: PCV oil Seperator in stock?
 

Thank you. I've tried PCV, Sealed caps foam filters in covers, shields under cover all running to base of carb and have a smoking problem when running. Disconnect and smoke goes away. So I wanted to try the separator and hook back up. Hoping to find .3 gain. LOLOLOL

Re: PCV oil Seperator in stock?
 

I run a similar PCV system and have difficulty with oil being drawn in the intake manifold. Designed baffles, etc, still get some oil.
I wrote to our Div 6 Tech director asking if I could install a Mororso separator in the line.
I was told, in Stock Class if it did come on the car orginally , " NO"
It would not be legal.
But on the upside, a little oil may help top ring seal. Lol.
If you get a NHRA tech guy to put in writing it's legal to do in Stock, please let us all know..

Steve Teeter Stk/SS 620.

Re: PCV oil Seperator in stock?
 

Ya know, for years I've run a cheap clear plastic fuel filter in my PCV valve line. It keeps the oil out and when it starts to get some oil puddled in it, I put a new one in.

Re: PCV oil Seperator in stock?
 

I never had that problem but I guess I never went fast enough.
I think, for 200 bucks , I'd dingle hone it and change the rings.
But, I'm pretty sure Jeff got his at the Glendale swap meet ;-)

Re: PCV oil Seperator in stock?
 

In all honesty it should be re ringed. I feel the blow by may be to much.