CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   roll bar location (https://classracer.com/classforum/showthread.php?t=79996)

Mike Savelle 08-10-2021 11:03 AM
roll bar location
 
first time putting a roll bar in a Malibu . does the bar have to be welded to the frame or can it be welded to the floor ?

Jim Hanig 08-10-2021 11:14 AM
Re: roll bar location
 
Quote:
Originally Posted by Mike Savelle (Post 645179)
first time putting a roll bar in a Malibu . does the bar have to be welded to the frame or can it be welded to the floor ?
The frame

Doug Domm 08-10-2021 11:47 AM
Re: roll bar location
 
And I’d suggest boxing the frame adjacent to wherever the bar meets the frame.

Mike Savelle 08-10-2021 03:47 PM
Re: roll bar location
 
thank you very much, just making sure, my rule book is a little old

Myron Piatek 08-11-2021 02:05 PM
Re: roll bar location
 
Run a box from the frame connectors to the rockers below the main hoop and angled bars behind the seats. Welding the frame connectors to or through the floor also helps stiffen everything up.

KennyAnderson 08-13-2021 03:42 PM
Re: roll bar location
 
To the frame on full frame cars and to the "plated" floor on uni-body cars.


All times are GMT -4. The time now is 03:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.