CLASS RACER FORUM - Bump steer in stock

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - Bump steer in stock (https://classracer.com/classforum/showthread.php?t=65780)

Bump steer in stock

Just double checking is it legal to use a bump steering kit in stock? We ran into a problem on the alignment with the tie rods being to long and the bump is way off. 4th gen f body. Thanks Tom

Re: Bump steer in stock

Quote:

Originally Posted by Tom Meyer (Post 531376)

Just double checking is it legal to use a bump steering kit in stock? We ran into a problem on the alignment with the tie rods being to long and the bump is way off. 4th gen f body. Thanks Tom

Rule Book
Section 10A, page 7

SUSPENSION, Front
Must retain complete stock front suspension system as produced
by manufacturer for body used, aftermarket tie rods with Heim
joints permitted. Lower control arm may be machined for larger
shock diameter and mount. Lift kits/travel limiters prohibited.
Sway bar optional. See General Regulations 3:4.

Re: Bump steer in stock

Well there's your answer, shim that heim joint up or down to control the bump steer