mid year corvette front springs?
I need to change my front springs. Car is just too low. Anyone change them from stock ones. These were landrum from my 80 that I cut 1/2 coil off. I can give them a call but would like to know some other options. Thanks.
http://i57.tinypic.com/2e5k5ec.jpg |
Re: mid year corvette front springs?
I've used the Moroso 47160 spring. I always cut off the flat end of the spring, just enough so the spring fits in the upper and lower pockets properly. Usually ends up being just over 1 coil off. Ride height is pretty good with an iron head big block. Might not be the best spring, but has always worked well.
|
Re: mid year corvette front springs?
Jeff, I should have added its an aluminum headed small block. I thinks its around 1440lbs front end weight. I think those would be too stiff.
|
All times are GMT -4. The time now is 04:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.