CLASS RACER FORUM - carb spacers

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - carb spacers (https://classracer.com/classforum/showthread.php?t=31836)

dragginwagon

03-01-2011 05:57 PM

carb spacers

will an engine actually pull air through a plywood carb spacer??...

1320racer

03-01-2011 05:58 PM

Re: carb spacers

plywood spacers have been in use for decades.

House of Darts

03-01-2011 08:33 PM

Re: carb spacers

The spacers are made of Baltic Birch plywood. The plywood has no voids many plys(its dense) and doesn't warp. It has a heat transfer less that phenolic resin. You can soak it in epoxy resin to make it super hard.

dragginwagon

03-02-2011 09:00 AM

Re: carb spacers

a CNC router holds down material with vacuum sucked through a sheet of 3/4 inch MDF...vacuum pump is 7hp...

All times are GMT -4. The time now is 04:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.