CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   I found a Stock Eliminator car in the Blueprint/Car Classifications but.. (https://classracer.com/classforum/showthread.php?t=27132)

Jason Fuller 07-19-2010 12:26 AM

I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
The car in question is the 2003 Pontiac Boneville SSEi.

There is no runner volumes on the head numbers,no replacement pistons and or weights, and the difference in rod length from 2002-2003 is an astounding .300"....Well just under....

After the frustration of this I came here and wanted to ask you if your combo that you run, or any other running combo does not have a documented runner volume listed and or bob weight unlisted.

This should be interesting...Thank
you in advance.

bill dedman 07-19-2010 12:52 AM

Re: I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
Are the newer rods longer???

Jason Fuller 07-19-2010 03:46 AM

Re: I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
No...the years of 2000-2002 are longer..the 2003 are almost .300" shorter..I've yet to see what this does on my engine analysis software...thay maybe a *** load lighter...but no info is given....thats why I'm frustrated...I go through a lot of combos to see whats happening....this one was the most frustrating....

art leong 07-19-2010 07:10 AM

Re: I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
Some times there are typos in NHRA's book. Check the real stock parts and see if it is.
If no piston manufacturer has submitted a piston, there will be no replacement pistons. You have to use the ones that are made by the manufacturer. As far a runner volumes goes they have never poured that particular combo so there aren't any numbers yet.

Pat Cook 07-19-2010 02:47 PM

Re: I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
So, if your heads are the first to get poured then that number goes into the classification guide?

Jason Fuller 07-19-2010 03:14 PM

Re: I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
Quote:

Originally Posted by Pat Cook (Post 199228)
So, if your heads are the first to get poured then that number goes into the classification guide?

Sweet! Hey Charlie, break out the epoxy for the flashing seams on the casting and hand me some of that there acid! ;)

greg fulk 07-19-2010 04:57 PM

Re: I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
Jason our 6cly V/SA engine has no #'s if dad didn't have the "good motor" bolted together on the stand I would take it to have poored

Jason Fuller 07-19-2010 06:18 PM

Re: I found a Stock Eliminator car in the Blueprint/Car Classifications but..
 
Quote:

Originally Posted by greg fulk (Post 199251)
Jason our 6cly V/SA engine has no #'s if dad didn't have the "good motor" bolted together on the stand I would take it to have poored

Wow! I thought there were some combos out there running down the strip without numbers..
Thanks Greg..


All times are GMT -4. The time now is 07:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.