CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Brake problem (https://classracer.com/classforum/showthread.php?t=70430)

Eman 01-15-2019 12:36 AM
Re: Brake problem
 
Did you find the problem?

Glenn Briglio 01-15-2019 07:47 AM
Re: Brake problem
 
Yes master cylinder

Eman 01-15-2019 11:38 AM
Re: Brake problem
 
So the MC wasn't sending as much pressure to the rear as the frt.? Are you running a replacement Mopar MC? I've got a Dorman Mopar MC on mine which is an 85 Camaro. Only thing about it I didn't like was the shallow bore where the rod goes into the piston. I modified my pedal quadrant to support the rod so it could never fall out. I've got a plate on the firewall but I do notice the firewall flexes a little too.

ss3011 01-15-2019 01:14 PM
Re: Brake problem
 
Quote:
Originally Posted by Glenn Briglio (Post 580365)
Yes master cylinder
Did you happen to teardown the old master cylinder to figure out where the leak occurred ?


All times are GMT -4. The time now is 05:16 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.