CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Solid roller lifters for LT1 (https://classracer.com/classforum/showthread.php?t=72648)

e vassar 04-11-2019 01:08 PM
Re: Solid roller lifters for LT1
 
1 Attachment(s)
Which one?

ss3011 04-11-2019 01:34 PM
Re: Solid roller lifters for LT1
 
The one on the right is a solid roller lifter , I think to run a tie bar style lifter in a late model LT1 block you need to have the .300" tall solid roller lifters .

Rich Biebel 04-11-2019 02:02 PM
Re: Solid roller lifters for LT1
 
On my LT-1 Stocker, I used Bullet short travel hydraulic rollers with the tie bars and recall those lifters could not be installed or removed with the head on...….

They were to tall and hit the head before they cleared the lifter bores

I Never had a reason to remove them so it was not a problem.....

Ed Wright 04-11-2019 05:28 PM
Re: Solid roller lifters for LT1
 
Quote:
Originally Posted by Rich Biebel (Post 586699)
On my LT-1 Stocker, I used Bullet short travel hydraulic rollers with the tie bars and recall those lifters could not be installed or removed with the head on...….

They were to tall and hit the head before they cleared the lifter bores

I Never had a reason to remove them so it was not a problem.....
That sounds like my Isky Red Zones. Like the shorter pushrods they need.
I am amazed solid lifters are now allowed in Stockers that didn't come with them.
Been too long since I ran Stock. I find how fast they are now very impressive.


All times are GMT -4. The time now is 07:45 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.