CLASS RACER FORUM - Ring thickness

Page 2 of 2

Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - Ring thickness (https://classracer.com/classforum/showthread.php?t=61214)

ss3011

02-12-2016 10:20 AM

Re: Ring thickness

Break in is critical , what's the procedure ?

Mike Mans

02-12-2016 10:30 AM

Re: Ring thickness

Just curious for the folks that have had a difficult time with their Total Seal ring packages, what Rpk, Rvk and Ra numbers did you end up with on your hone finishes?

V M Kauffman

02-12-2016 12:33 PM

Re: Ring thickness

Radial tension of the top ring is critical. Dig out you old Direction Book Chrysler had a very good procedure for breakin! Real way to check if you have good breakin is to measure Blowby!

Quote:

Originally Posted by ss3011 (Post 495376)

Break in is critical , what's the procedure ?

Larry Hill

02-12-2016 02:58 PM

Re: Ring thickness

Steel ring is 4.385, bore is 4.375 it takes a little time for the ring to round up. As they say its a Chevy world.

All times are GMT -4. The time now is 02:43 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.