HOME MAGAZINE FORUM RULES SPONSORS CONTACT
     
   
   
Go Back   CLASS RACER FORUM > Class Racer Forums > .90 Heads Up Class Racing Tech

Reply
 
Thread Tools Display Modes
Old 06-21-2020, 01:26 PM   #1
DJP8813
Junior Member
 
Join Date: Apr 2020
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default Torsion bar front-end help..

are there any experts out there on torsion bar front suspension like on a brogie roadster?? Last year the car transferred weight and planted the tires very good. 1.15 60ft with a mild sbc. I rebuilt the torsion bar over the winter because everything was worn out. I believe I put everything back where it was but now the car will not transfer weight at all and will only 60ft 1.25. My question is how or can I adjust the front to help it, I dont have any experience with these type of front ends. Thanks in advance.
DJP8813 is offline   Reply With Quote
Old 06-21-2020, 02:57 PM   #2
Tom Goldman
VIP Member
 
Tom Goldman's Avatar
 
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,241
Likes: 285
Liked 209 Times in 70 Posts
Default Re: Torsion bar front-end help..

I did a MkV a couple years ago ,and others in the past.
the last one .the fitment of the torsion bar seemed off for the nylon washers and was actually compressing the washers and tightening the arm against the tube . There should be no friction there .
I got thinner washers from McMaster-Carr.
We also questioned the spring rate of the new bar and were told by MW that they are the same rate and vendor they were 30 years ago.
The wrong ride height can screw things up too , but that is usually very obvious
__________________
Tom Goldman 1500 SG , 1506 STK
Tom Goldman is offline   Reply With Quote
Old 06-24-2020, 02:31 PM   #3
Charlie Yannetti
Member
 
Join Date: Jan 2005
Location: Alpine, NJ
Posts: 428
Likes: 21
Liked 38 Times in 12 Posts
Default Re: Torsion bar front-end help..

I was going to steer you toward Tom Goldman, but apparently he reads earlier in the day than me.. LOL!!!
Charlie Yannetti is offline   Reply With Quote
Liked
Old 06-25-2020, 07:26 AM   #4
StompNDump
Junior Member
 
Join Date: Nov 2019
Posts: 43
Likes: 0
Liked 2 Times in 2 Posts
Default Re: Torsion bar front-end help..

Crank height the same as it was before?
StompNDump is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.Ad Management plugin by RedTyger