Big list of stuff

[chevrolet]

1-Fluid transfer pump -last used for diff fluid I believe ( mounts on car)--$40
2- 2and 5/8 " gauge greenlee punch ( for dash gauges) --$30
3- ring and pinion setup tool (proform) $20

4- Hurst shifter cover for 1/4 stick NEW --$15
5- Miller Tig machine with water cooler (very LOW hours incl. bottle,gauge, tig wire , syrowave 250.-$2000, I paid much more for all this.
6- 4 ton prunch press with tooling 1/8" -- to 2" no commercial use, I bought this new for me.-$2000 paid much more for this too.
7-NEW TSI shorty trans dipstick-$25
8-Speedtech nitrous BN bottle gauge, and 4150plate.-$100
9-Wheelie bar parts, NEW wheels, wheel housings, and mounting brackets-$70
10-Glide cores 1 stock,-$35, 1 TSI prepared for double dump transbrake-$55.
11-inch pound torque wrench,BN ,-- $20.
12-Pit pal style clip on alum work tray for trailer BN ( I build them) comes with all side rails and mounts - $80. VERY nice.
13-421 pistons 4.155 X 3.875 for a 6" rod Brooks pistons, and Total seal rings, locks,pins.-$450

14-Alum tubing 1/2" and 5/8" $10.
15-10 and 12 bolt diff shims Large amt. $30.
16-Moroso compression plate for measuring cc's.-$ 20

17-Central dial indicator setup tool with nice case.( Very nice tool)-$35
18-Assorted ProWerks steel bungs and petcocks and plugs.-$5 each, 35 all.
19-Autometer black 2and 5/8 gauge cup setup.-(3202) $10.
20- Smallfuel pressure gauge ( magna fuel)-$8.
21-Strarrett radius gauges .020-.400 (#279)-$35, .5mm -15mm stainless, -$35, Big radius ga. 9/16 , --1" -$35. small hole gauges 1/8 -1/2 stainless, also reads metric (#5829E)-$35.
22-Plastic Strange diff carrying case.-$20. 23-Reece sway control-$30.


All prices are OBO Im getting out of racing slowly, I have MUCH more. Car will be 4 sale ,Trailer also. These parts are in excellent shape and not worn out. I didnt race much due to health problems this is no BS.If you need pics OK can sent Im 62 and DONT TEXT. I sent pics to email addresses. Thanks very much for looking or reading now.DR.

[Mike Pearson]

I would be interested in the clip on work tray. Can you e mail a picture.

ssia2485@yahoo.com

Thanks

[camaroinmotion]

Interesting in the quarter shifter cover. Call me. 484 877 1783

[Lyn Smith]

Interested in r and pinion tool,and dial indicator.shipping to 61764 do you do pay pal?

[Ron Miller]

Originally Posted by Mike Pearson

I would be interested in the clip on work tray. Can you e mail a picture.

ssia2485@yahoo.com

Thanks

2X what Mike's asking, Thanks Ron rmiller249@comcast.net

[chevrolet]

PM'ed all interested, if you didnt get them let me know..DR.

[Lyn Smith]

I did not get one??

[sterling simmons jr]

Can you give me a call at 804-543-2466 Mark

[Bob Bender]

I will take the small fuel gauge