Go Back   CLASS RACER FORUM > Class Racer Forums > Bracket Racing

Thread Tools Display Modes
Old 01-14-2024, 07:06 PM   #1
Junior Member
Join Date: Apr 2020
Posts: 1
Likes: 1
Liked 0 Times in 0 Posts
Default Biondo Throttle stop

I got to wiring my Biondo delay box today. Here is what happened. I wired the box to 12v switched source. Transbrake terminal to solenoid and 2 step on msd box. Wired ground to ground post. Push button 1 to one side of transbrake switch, the other side to the trans solenoid. Then I wired my 12v feed from the throttle stop on the box to the biondo throttle stop solenoid. Upon turning the power on I tested everything for the transbrake and everything worked fine. About 30 seconds in the main distribution fuse blew(60 amp for the switch panel and electronics). I turned the kill switch off and checked around and found the biondo throttle stop to be very hot. Got a test light after disconnecting the solenoid and found the power from the mega 85 t stop to be active even with no timers active! Has anyone ever seen the issue? Thanks
Andygordon24 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 05:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.