|
06-24-2021, 10:37 PM | #1 |
Junior Member
Join Date: Aug 2008
Posts: 78
Likes: 52
Liked 58 Times in 33 Posts
|
100 lbs.
Always been told lose a 100 pounds pickup a tenth in the 1/4 if so what is it worth in the 1/8 mile? Also if running a 5.83 gear in the 1/8 what gear is needed to turn same rpms in the 1/4 finish line?
Terry |
06-25-2021, 08:11 AM | #2 |
Member
Join Date: Oct 2017
Location: Bay City Texas
Posts: 358
Likes: 1
Liked 202 Times in 123 Posts
|
Re: 100 lbs.
We did a lot of 1/8 and 1/4 in early 70s with a manual 1/4 speed. Found that we ended up with the same gear ratio in rear. I would just stretch 3 rd gear out in 1/8 could run 1/8 with just 2 shifts.
Last edited by Ralph A Powell; 06-25-2021 at 08:48 PM. |
Liked |
06-25-2021, 01:58 PM | #3 |
Senior Member
Join Date: Jan 2002
Posts: 653
Likes: 8
Liked 238 Times in 25 Posts
|
Re: 100 lbs.
If 100 pounds is worth 0.1 sec in 1/4 mile, it's worth 0.06 in the 1/8 mile.
|
Liked |
06-25-2021, 05:49 PM | #4 |
Junior Member
Join Date: Aug 2008
Posts: 78
Likes: 52
Liked 58 Times in 33 Posts
|
Re: 100 lbs.
Thanks for the replies. Figured it should pickup about whatever it was worth by the 1/8 but wasn't sure.
Terry |
06-27-2021, 07:45 PM | #5 |
Member
Join Date: Dec 2009
Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66
Posts: 308
Likes: 0
Liked 17 Times in 13 Posts
|
Re: 100 lbs.
I know a lot of old 1/8 mile guys who ran 6.00+ gears. but with old 4 speeds, I thinks the time shifting [between gears] cost them.
in my car, when running a 4 speed and a 5.67, streeeeetching 3rd netted better ets, than running a 6.20 and hitting all 4 gears. maybe with the new very high dollar clutchless 4 speeds, it would take a lot of data logging to know. 6 to 7 seconds happens real fast. Rod in AZ |
Liked |
|
|