|
03-28-2007, 01:07 PM | #1 |
Junior Member
Join Date: Jun 2006
Location: CANADA
Posts: 76
Likes: 0
Liked 0 Times in 0 Posts
|
DANA -- 70 -- Information
I have a one ton DANA 70 rearend with a 4.56 gearset. I want to install a 3.70 gearset in it's place. Would anyone out there know what is required to do this change along with the parts that are needed. This DANA has the 9 or 10 bolt cover which i was told was the old style. Lets hear from the experts. --- Thankyou
Kevin MacLeod |
03-28-2007, 04:01 PM | #2 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,998
Likes: 693
Liked 1,469 Times in 549 Posts
|
Go to the website of randy's Ring and Pinion. They have everything you need to change gears.
http://www.ringpinion.com |
03-28-2007, 07:57 PM | #3 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,452
Likes: 816
Liked 771 Times in 220 Posts
|
You will be going past the split point for the carrier. ... You will need a different differential if you go numerically lower than 4.56 ... Tom
__________________
Tom Goldman 1500 SG , 1506 STK |
|
|