68 camaro alignment specs

et7333 · 04-21-2022, 01:22 PM

Time to get an alignment on my sbc 10 second Camaro.Any help on caster,camber,toe specs in stock control arms,Landrum front springs.Thanks

vette5148 · 05-01-2022, 07:26 PM

Done several cars like that. Either sit in the car during the alignment or put weight in to simulate you in it. I would set the camber at 0.1-0.2 degrees positive. The caster can be hard to get with stock control arms. I try to get between 1.5-2.5 degrees positive. You can get upper control arm shafts that are offset to help adjust camber and caster. As far as the toe I raise the front suspension 1-2 inches to simulate going down the track and set the toe close to zero or maybe in 0.02" per side.

04-21-2022, 01:22 PM	#1
et7333 Member Join Date: Sep 2007 Posts: 155 Likes: 0 Liked 1 Time in 1 Post	68 camaro alignment specs Time to get an alignment on my sbc 10 second Camaro.Any help on caster,camber,toe specs in stock control arms,Landrum front springs.Thanks __________________ http://stevecoxracing.com

05-01-2022, 07:26 PM	#2
vette5148 Junior Member Join Date: Jan 2022 Posts: 17 Likes: 38 Liked 32 Times in 9 Posts	Re: 68 camaro alignment specs Done several cars like that. Either sit in the car during the alignment or put weight in to simulate you in it. I would set the camber at 0.1-0.2 degrees positive. The caster can be hard to get with stock control arms. I try to get between 1.5-2.5 degrees positive. You can get upper control arm shafts that are offset to help adjust camber and caster. As far as the toe I raise the front suspension 1-2 inches to simulate going down the track and set the toe close to zero or maybe in 0.02" per side.