|
05-16-2014, 06:03 PM | #1 |
Member
Join Date: Jul 2002
Posts: 389
Likes: 1
Liked 299 Times in 56 Posts
|
Air Ride MH problems
I have 98 HR on freightliner chassis. The front air bags are very slow to inflate and seem to be low pressure. Is there a pressure regulator in the air bag system? Ride height valves seem to be ok. can someone point me in the right direction?
Mike Graham |
06-04-2014, 10:04 AM | #2 |
Member
Join Date: Dec 2003
Location: Brownsburg,Indiana
Posts: 326
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Air Ride MH problems
In the 90's many MH builders used a Norgren ride height valve to control air in and air out to beach of the Air bags, Mine went bad and I replaced it. there are 2 relay solenoids one on each side. Mine was located in the front up in the frame rail, I have a picture if you need it.
__________________
Chuck Westcott- S/C -S/G 225 |
06-04-2014, 10:46 AM | #3 |
Member
Join Date: Jul 2002
Posts: 389
Likes: 1
Liked 299 Times in 56 Posts
|
Re: Air Ride MH problems
Thanks Chuck. I will check that out.
|
|
|