|
12-29-2007, 10:12 PM | #1 |
Junior Member
Join Date: Jan 2006
Location: Maryland
Posts: 81
Likes: 0
Liked 0 Times in 0 Posts
|
Powerglide V8 Gear set
Was given a powerglide that has been sitting around. Needed just the case but decided to open up just for grins and smiles. Found a stock v8 gear set which is all i run anyway. problem is that the trans must have sat outside for sometime, about half of the gear set is rusted. I can't get it to spin. Is there anyway to clean this such as glass bead or acid dip or something that won't destroy it?? Thanks for the info.
__________________
87 Cavalier, 92 Corvette, 72 Nova, 68 Firebird |
12-29-2007, 11:42 PM | #2 |
Junior Member
Join Date: Jul 2007
Location: Kemah TX
Posts: 93
Likes: 0
Liked 1 Time in 1 Post
|
Re: Powerglide V8 Gear set
I would try to bead blast it first with about 90 PSI and stay back from it about 6" to try and dust off the rust. I might have a stock set of 1.76 gears and pins if you need them let me know, Mike
__________________
Mike Hedger S/C 4646 MPH Racing and Fabrication |
|
|