Nova stocker project. - Page 18

Glenn Hayes · 11-19-2019, 11:43 AM

Very well done and fast !
Let us know how your freshened engine works out.

Mark Yacavone · 11-19-2019, 12:20 PM

Good that you found those problems early.
Looking forward to those dyno sheets.

Alan Nyhus · 11-19-2019, 07:45 PM

Quote:

Originally Posted by Mark Yacavone

Good that you found those problems early.

Yes...the lobes had begun to look herky earlier in the season but the leading/trailing edges of the nose were still okay. The lash wasn't changing but toward the end of the season it got 'flat' and unresponsive to changes so I wasn't surprised to see half a dozen like this when I took it apart.

The last pass on it was at the Div 5 Nat. Open at Kearney, Ne and it went -.88 and change under.

Stocker Life.....

Markeracer · 11-19-2019, 08:10 PM

What lifter are you using and how crazy is the spring pressure?

Bill Bogues · 11-19-2019, 08:16 PM

tell us what you found out about the spots on the cam lobes. I had the same thing happen on two different engines and got all kinds of reason's for it happening but nothing definite. Oil, spring pressure,lifters etc... etc. Sure would be nice to know for sure what caused it.

HP HUNTER · 11-19-2019, 09:05 PM

Alan

You should think about running the Stock Super Stock combo races @ Bandimere. There will be several G/SA cars there, so your Chevy will feel right at home. Denver's cars are usually fast so you'll have good cars to compare to.

Alan Nyhus · 11-19-2019, 09:50 PM

Quote:

Originally Posted by HP HUNTER

Alan, You should think about running the Stock Super Stock combo races @ Bandimere. There will be several G/SA cars there, so your Chevy will feel right at home. Denver's cars are usually fast so you'll have good cars to compare to.

Making plans to head that way next season.

-Al

HP HUNTER · 11-19-2019, 10:09 PM

Quote:

Originally Posted by Alan Nyhus

Making plans to head that way next season.

-Al

Thats great! Let me know when your coming. I think in this area of the country the Denver weather is better, the track is better, less wind, of course the baro is horrible but its all relative. Kearney is always a train wreck for me, I like the town but never seen to be able to get it done there, the weather always gets me.

Alan Nyhus · 11-20-2019, 09:20 AM

Quote:

Originally Posted by Markeracer

What lifter are you using and how crazy is the spring pressure?

Trend lifters and PAC 1409X springs.

https://www.racingsprings.com/index....ring-8086.html

Quote:

Originally Posted by Bill Bogues

tell us what you found out about the spots on the cam lobes. I had the same thing happen on two different engines and got all kinds of reason's for it happening but nothing definite. Oil, spring pressure,lifters etc... etc. Sure would be nice to know for sure what caused it.

Bill, I think there's just a certain life expectancy of this style of lobe. There's a tremendous amount of pressure concentrated on a very narrow 'peak' on both the opening and closing sides of the lobe.

This would be a good topic for the Tech section, for sure. -Al

Sean Marconette · 11-20-2019, 08:29 PM

Alan,
Good luck during the off-season! No rest for those in a performance based category, as there is always something to improve on or look at.

Sean

11-19-2019, 11:43 AM	#171
Glenn Hayes Member Join Date: Feb 2009 Location: Weeki Wachee, Florida Posts: 348 Likes: 416 Liked 18 Times in 12 Posts	Re: Nova stocker project. Very well done and fast ! Let us know how your freshened engine works out. __________________ "Real Race Cars Have Tailgates"

11-19-2019, 12:20 PM	#172
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,414 Likes: 2,579 Liked 4,447 Times in 1,693 Posts	Re: Nova stocker project. Good that you found those problems early. Looking forward to those dyno sheets. __________________ We are lucky we don't get as much Government as we pay for..... Will Rogers

11-19-2019, 08:10 PM	#174
Markeracer Junior Member Join Date: Jul 2018 Location: Joliet, IL Posts: 77 Likes: 10 Liked 69 Times in 28 Posts	Re: Nova stocker project. What lifter are you using and how crazy is the spring pressure?

11-19-2019, 08:16 PM	#175
Bill Bogues Member Join Date: Apr 2005 Location: Bethany La. Posts: 318 Likes: 83 Liked 169 Times in 52 Posts	Re: Nova stocker project. tell us what you found out about the spots on the cam lobes. I had the same thing happen on two different engines and got all kinds of reason's for it happening but nothing definite. Oil, spring pressure,lifters etc... etc. Sure would be nice to know for sure what caused it. __________________ Bill Bogues 4696 STK

11-19-2019, 09:05 PM	#176
HP HUNTER Senior Member Join Date: Feb 2012 Location: Colorado Springs Colorado/Thousand Oaks Ca Posts: 606 Likes: 68 Liked 238 Times in 97 Posts	Re: Nova stocker project. Alan You should think about running the Stock Super Stock combo races @ Bandimere. There will be several G/SA cars there, so your Chevy will feel right at home. Denver's cars are usually fast so you'll have good cars to compare to.

11-20-2019, 08:29 PM	#180
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 958 Likes: 617 Liked 165 Times in 60 Posts	Re: Nova stocker project. Alan, Good luck during the off-season! No rest for those in a performance based category, as there is always something to improve on or look at. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode