HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech


Reply
 
Thread Tools Display Modes
Old 11-15-2019, 05:53 PM   #31
Tex013
Junior Member
 
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 88
Likes: 18
Liked 30 Times in 19 Posts
Default Re: Drag radial life/ max passes ?

well finally got out to a T&T last night .
5 passes . It was warm low 90s down to low 80s with humidity in the teens .
Was hard to get car cool , especially with the 30 minute traffic jam on the freeway on way in . was around 190deg engine most passes
DA was 2840 down to 2250 between 6.17PM and 9.12PM
Any hoo .
First 2 passes was like oh my god , very slow sixty /et( 1.48/10.48) but mph was normal at 1/8 and 1/4 . OK new tyres .
PSI started @ 19 1/4 then 20 psi , shock settings as per normal
3rd pass 21psi and bigger burnout . 1.46/10.39/128.89 . That's better
4th pass 22psi same burnout . 1.46/10.40/128.37 . Tyre face looked better across
5th pass 22psi same burnout . 1.45/10.38/128.47 . Tyre face looks about right .
Track championship round next weekend .
Tyre feels good , I hope it will come in a little more , car has been 1.42/43.
I know I can dial to this .
Thanks for all the feedback/replies .

Tex
Tex013 is offline   Reply With Quote
Old 11-20-2019, 04:38 PM   #32
Tex013
Junior Member
 
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 88
Likes: 18
Liked 30 Times in 19 Posts
Default Re: Drag radial life/ max passes ?

this is first or second pass

https://cacklingpipes.zenfolio.com/p513758923/edd3a9dde

4th pass

https://cacklingpipes.zenfolio.com/p513758923/edd3a9dd4

5th pass

https://cacklingpipes.zenfolio.com/p513758923/edd3a9dd8

Looking at tyre in 4th pass may need a little more pressure ? Anyone running around 23psi with the Hoosier ?

Tex
Tex013 is offline   Reply With Quote
Old 11-20-2019, 05:52 PM   #33
gsa612
Senior Member
 
gsa612's Avatar
 
Join Date: Jan 2008
Location: 100th Meridian
Posts: 570
Likes: 116
Liked 280 Times in 139 Posts
Default Re: Drag radial life/ max passes ?

Keep adding air till the 60' drops,you may be able to run 24-25 psi...gsa612
gsa612 is offline   Reply With Quote
Liked
Old 11-20-2019, 07:30 PM   #34
Tex013
Junior Member
 
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 88
Likes: 18
Liked 30 Times in 19 Posts
Default Re: Drag radial life/ max passes ?

thanks GSA ,
will try 23 in 2nd qual Saturday .
Have a 1/8 mile private club meeting the following week . More testing then with psi

Tex
Tex013 is offline   Reply With Quote
Old 12-01-2019, 04:50 PM   #35
Tex013
Junior Member
 
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 88
Likes: 18
Liked 30 Times in 19 Posts
Default Re: Drag radial life/ max passes ?

Final instalment

Ran track championship round , 4 passes . dang red eliminator round 1 .
Ran on Saturday , 1/8th mile races , 8 passes .
Tyres seem happiest at 23psi , did try 24 for 2 passes no improvement .
This is my take on the runs .
The Hoosier is slower than the Pro Bracket Radial , 0.02 - 0.03 slower in sixty and all way down track . MPH is very similar .
If it spins , did twice , it does not recover as well as the PBR . One spin I expected due to poor burnout , car corkscrewed in burnout . They do need a reasonable burnout with my car . No just light haze them .
It is probably more sensitive to track prep . I am sure track champ rounds are better than T&T and private days where you wont see them drag the track during the day unless there is oil down .
The Hoosier has been really consistent .
Doubt I will race Dec final meeting , 4th place but cannot get into top 2 .
Will probably run in January national grp 1 meeting . But will also be HOT , but track prep will be at its best .
thanks again ,

Tex
Tex013 is offline   Reply With Quote
Old 02-02-2020, 07:08 AM   #36
Tex013
Junior Member
 
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 88
Likes: 18
Liked 30 Times in 19 Posts
Default Re: Drag radial life/ max passes ?

Just a little update .
Ran 2 weeks ago at national grp 1 ihra event .
Weather was damp leading into event and on qualifying day .
Temp was 80s , GOW 100-108 . DA 2800-3500 or so
Friday track seemed to have minimal prep . Blew the tyres off first pass , 2,75 sixty , shifted into 2nd in the sixty
2nd pass sort of hooked , 1.745 sixty , 10.80 @126 pass . So lost 3/10s in sixty but got down track
Saturday was the same weather
Rnd1 took the win . 1.47 sixty . Dialed 10.50 went 10.53@117 on brakes .
Ok got something to dial against
Famous last words . Blew the tyres off again , in fact a mate said there was smoke off tyres like a burnout . The cherry didnt help
So i guess these Hoosiers arent liking my Plymouth , transbrake whatever ?
Wint be out for a few more weeks , work situation .
May have to try footbraking ?
Not sure about another $1200 on tyres .

Tex
Tex013 is offline   Reply With Quote
Old 02-03-2020, 11:52 AM   #37
Lenny5160
Senior Member
 
Lenny5160's Avatar
 
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 898
Likes: 604
Liked 432 Times in 225 Posts
Default Re: Drag radial life/ max passes ?

The radials will do that, but if you work on your car to make them work you will be rewarded.

The front suspension is where it's at. Needs to move freely to transfer the weight.
__________________
S/ST 51
S/C 53
Lenny5160 is offline   Reply With Quote
Old 02-03-2020, 02:50 PM   #38
Ed Wright
Veteran Member
 
Ed Wright's Avatar
 
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 168 Posts
Default Re: Drag radial life/ max passes ?

Quote:
Originally Posted by Lenny5160 View Post
The radials will do that, but if you work on your car to make them work you will be rewarded.

The front suspension is where it's at. Needs to move freely to transfer the weight.
Front is also where we control wheel stands.
__________________
Ed Wright 4156 SS/JA
Ed Wright is offline   Reply With Quote
Old 02-03-2020, 04:26 PM   #39
Tex013
Junior Member
 
Join Date: Oct 2012
Location: Sydney , Australia
Posts: 88
Likes: 18
Liked 30 Times in 19 Posts
Default Re: Drag radial life/ max passes ?

Lenny , Ed
thanks for the response . I have only ever run radials on the Plymouth , bought it in 2007 . Never had this issue with the MT PBR only this Hoosier style . Is there some fine adjustment with shocks left ,yes . Enough to eliminate this , probably not .
Will normally lift front wheels 6-8" , rear will separate / lift 3-4". Has caltracs . So it is hitting tyre hard , pics always show some tyre wrap .

Tex
Tex013 is offline   Reply With Quote
Old 02-03-2020, 05:01 PM   #40
Lenny5160
Senior Member
 
Lenny5160's Avatar
 
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 898
Likes: 604
Liked 432 Times in 225 Posts
Default Re: Drag radial life/ max passes ?

Quote:
Originally Posted by Tex013 View Post
Lenny , Ed
thanks for the response . I have only ever run radials on the Plymouth , bought it in 2007 . Never had this issue with the MT PBR only this Hoosier style . Is there some fine adjustment with shocks left ,yes . Enough to eliminate this , probably not .
Will normally lift front wheels 6-8" , rear will separate / lift 3-4". Has caltracs . So it is hitting tyre hard , pics always show some tyre wrap .

Tex
What RPM is your 2-step at, and which front hole is the Caltrac bar in?
__________________
S/ST 51
S/C 53
Lenny5160 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.