HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Bracket Racing


Reply
 
Thread Tools Display Modes
Old 01-11-2020, 02:27 PM   #1
ImBack
Junior Member
 
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
Default Radials

Did a little bit of searching on here but couldn't quite find the right answer. Any bracket racers running the Mickey Thompson or Hoosier radials? I have an S10 I was trying to fill up the fender wells with a 14-in slick but the Hoosier tires I bought with the wheels have a 2-in bulge. I know the radials have a lot less bulge, but I haven't talked to too many people who have tried them successfully.
ImBack is offline   Reply With Quote
Old 01-13-2020, 12:01 PM   #2
Hacksaw
Senior Member
 
Join Date: Sep 2016
Posts: 835
Likes: 148
Liked 272 Times in 149 Posts
Default Re: Radials

Quote:
Originally Posted by ImBack View Post
Did a little bit of searching on here but couldn't quite find the right answer. Any bracket racers running the Mickey Thompson or Hoosier radials? I have an S10 I was trying to fill up the fender wells with a 14-in slick but the Hoosier tires I bought with the wheels have a 2-in bulge. I know the radials have a lot less bulge, but I haven't talked to too many people who have tried them successfully.
Always check the section width of the slick if your tight on clearance. I liked the Hoosier # 18239 31.5/13.5-15 Radial. Tread width is 13.5 & Sec. width is 16.3". Best to use a 14" wide rim.
Hacksaw is offline   Reply With Quote
Liked
Old 01-13-2020, 09:22 PM   #3
ImBack
Junior Member
 
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
Default Re: Radials

Quote:
Originally Posted by Hacksaw View Post
Always check the section width of the slick if your tight on clearance. I liked the Hoosier # 18239 31.5/13.5-15 Radial. Tread width is 13.5 & Sec. width is 16.3". Best to use a 14" wide rim.
I'm going to do some more measuring but that was the tire I was looking at.
ImBack is offline   Reply With Quote
Old 01-24-2020, 12:47 PM   #4
Mike Pearson
VIP Member
 
Mike Pearson's Avatar
 
Join Date: Mar 2007
Posts: 2,366
Likes: 553
Liked 1,636 Times in 506 Posts
Default Re: Radials

Quote:
Originally Posted by Hacksaw View Post
Always check the section width of the slick if your tight on clearance. I liked the Hoosier # 18239 31.5/13.5-15 Radial. Tread width is 13.5 & Sec. width is 16.3". Best to use a 14" wide rim.
This is the tire I run on my super stock car. Good tire. Hooks good. good life. I would give them a try.
__________________
Mike Pearson 2485 SS
Mike Pearson is online now   Reply With Quote
Liked
Old 01-24-2020, 07:40 PM   #5
ImBack
Junior Member
 
Join Date: Jan 2020
Posts: 27
Likes: 0
Liked 5 Times in 4 Posts
Default Re: Radials

Quote:
Originally Posted by Mike Pearson View Post
This is the tire I run on my super stock car. Good tire. Hooks good. good life. I would give them a try.
I would but I have the wrong backspace. I bought some MT 10.5x33x15Ws,they fit exactly flush to outside fender.I needed 5 1/2 B's and screwed up somehow 🤔
ImBack is offline   Reply With Quote
Old 11-12-2020, 11:04 PM   #6
LemonWedge
Junior Member
 
Join Date: Apr 2017
Posts: 6
Likes: 1
Liked 1 Time in 1 Post
Default Re: Radials

I’ve had stellar results with MT’s PBR. I’ve been running the 28x9 for a few years. Now in the midst of some work to make room for more tire, and will be running the PBR in a 29.5 x 10.5 moving forward. I also have a number of buddies that love the nPBR; one of them recently tried a Hoosier radial, and says he lost half a tenth somehow (???), but is seeing similar consistency.
LemonWedge is offline   Reply With Quote
Old 11-13-2020, 05:54 PM   #7
NHRA1926
Member
 
Join Date: Dec 2015
Location: Bowling green, Ky
Posts: 208
Likes: 11
Liked 161 Times in 51 Posts
Default Re: Radials

I have been running the Mickey Thompson Pro Bracket Radial 29.5x10.5 for 3 years. I got over 180 runs on the first set. When I brought them over to the Mickey Thompson trailer, they asked why I wanted new ones. I said I had almost 150 runs on them, they asked if they were still hooking ok, I said yes, they said, "Run them till the cords show, or you start seeing your 60 foot change." I ran them for another month, then bought a new set just because they had over 180 runs on them. BEST hooking tire I have ever used. Soon as I installed them, 60 foot went from 1.46-1.50 down to 1.37-1.40. Car used to roll over the tire and porpoise 2-3 times before hooking. Now its doing 2-3 foot wheel stands! This is the ONLY tire I will use on my combination. It is a stiff side wall tire. I do not use tubes, and they are not screwed to the tire. Also, I've only had to add air to them a couple of times throughout the season, they do not move as far as pressure goes. Mickey Thompson said they know cars that have over 250 runs on these tires.
NHRA1926 is offline   Reply With Quote
Old 11-30-2020, 01:48 AM   #8
GTX JOHN
VIP Member
 
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,517
Likes: 2,205
Liked 1,776 Times in 569 Posts
Default Re: Radials

How much Air do you run in the big Radials.

Our Superstock car has been as low as 13 and as high as 19.

I keep raising the pressure and my son keeps lowering it!
__________________
John Irving
741 Stock
741 Super Stock
GTX JOHN is offline   Reply With Quote
Old 11-30-2020, 10:59 PM   #9
THROWER2010
Junior Member
 
Join Date: Nov 2020
Posts: 7
Likes: 12
Liked 3 Times in 2 Posts
Default Re: Radials

i'm running the M/T 31x13.5x15 PBR and love them. keep going up on air pressure. started at 13 and have gone up to 15 so far.
footbrake car running 6.15 to 6.32
brother in Christ
walt
THROWER2010 is offline   Reply With Quote
Liked
Old 01-29-2021, 09:53 AM   #10
Dano
Member
 
Dano's Avatar
 
Join Date: Oct 2019
Location: Hurricane, Utah
Posts: 156
Likes: 36
Liked 53 Times in 33 Posts
Default Re: Radials

Quote:
Originally Posted by Hacksaw View Post
Always check the section width of the slick if your tight on clearance. I liked the Hoosier # 18239 31.5/13.5-15 Radial. Tread width is 13.5 & Sec. width is 16.3". Best to use a 14" wide rim.
with a 12" rim, section measures 16.250, same tire.
__________________
SC 707Y
Dano is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.