HOME FORUM RULES SPONSORS CONTACT
     
   
   
Go Back   CLASS RACER FORUM > Class Racer Tech > Support Tech


Reply
 
Thread Tools Display Modes
Old 05-30-2021, 02:32 PM   #1
Rob Petrie E395
Senior Member
 
Join Date: Dec 2007
Location: Woodlawn IL
Posts: 883
Likes: 9
Liked 15 Times in 9 Posts
Default 1998 GMC K3500 7.4L vibration

I've owned this truck since almost new (less than 3000 miles) From day 1 it has had a very slight vibration around 2200 Rpms. It was a executives vehicle. He got upset about the vibration. And dumped it at the dealer I worked at.. The vibration never bothered me. I just figured it was something internal and eventually it would get worse and I'd either rebuild it and balance it or put another engine in it. Fast forward 20+ years and 150,000+ miles. All the sudden one day my buddy borrows to haul calves. And it gets bad enough to be concerning. While checking it out I noticed that it seemed like the engine moved a lot. And the drivers side motor mount may be starting to bad. So I get one and I'm hurt so my buddy comes over to my shop and puts it in. To my surprise it 100% cured the vibration. I was like I've been driving this thing for 20+ years like this and it was just a motor mount. Or so I thought. 3 months later out of the blue its back with a vengeance. But its different its vibrating on deceleration where before it was on acceleration. Even sitting still in park it vibrated with the rpms going up not down. We look at it and it seems the right motor mount may now be doing the same as the left. If you've ever changed motor mounts on one of these things you know why both were not changed at one time. Its not a fun job. So my buddy comes over and changes the right motor mount. Its cured again. Or so we thought. 3 days and a couple hundred miles later its vibrating again. So either were getting bad parts that look perfectly fine. Or something else is wrong. If anybody has any ideas before we fight another set of motor mounts into this thing I'm all ears.
Rob Petrie E395 is offline   Reply With Quote
Old 05-30-2021, 07:04 PM   #2
Glenn Briglio
Senior Member
 
Glenn Briglio's Avatar
 
Join Date: Nov 2002
Location: Massapequa Park,NY
Posts: 822
Likes: 800
Liked 264 Times in 105 Posts
Default Re: 1998 GMC K3500 7.4L vibration

Did you check the transmission mount and driveshaft while your at it.
__________________
B&B Auto Machine Shop Oceanside NY (516) 599-7182 1989 Camaro Iroc-Z I/SA
Glenn Briglio is offline   Reply With Quote
Old 06-03-2021, 06:44 PM   #3
Mark Ugrich
Member
 
Join Date: May 2011
Location: Auburndale,Florida
Posts: 157
Likes: 2
Liked 12 Times in 12 Posts
Default Re: 1998 GMC K3500 7.4L vibration

Just a thought, but did you try unbolting the torque converter and running the engine?
Mark Ugrich is offline   Reply With Quote
Old 06-06-2021, 01:27 PM   #4
Mark Ruset
Member
 
Mark Ruset's Avatar
 
Join Date: May 2006
Location: Southwest Florida
Posts: 231
Likes: 2
Liked 25 Times in 19 Posts
Default Re: 1998 GMC K3500 7.4L vibration

I recall a GM service bulletin that addressed engine vibrations, It had to do with adding a shim type spacer between the block and mount. I believe the issue had to do with alignment of the motor mounts. I don't recall what years it was related to. On another note make sure that the motor mount bolts going into the block are not bottoming out before the mount is completely tightened,
__________________
Mark Ruset 2048 STK
Mark Ruset is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.