Dumbo The Flying Elephant - Page 58

SSDiv6 · 03-26-2022, 10:10 AM

Quote:

Originally Posted by Larry Hill

I think I'm done!

Have you tried ACL or Clevite bearings?
I know there are many that have not experienced issues with King bearings and will vouch for them.
Due to the issues, others and I have experienced with King bearings, I have not used them since 2017. My "to go" bearings are ACL, Clevite, and when I can find them, Speed Pro. In 2017, we had issues with several Trophy Truck engines with King Bearings. Switched to Clevite and ACL and no more issues.

The pictures below are issues that some other engine builders have experienced with King bearings:

Larry Hill · 03-28-2022, 08:07 AM

Thanks. It looks like plenty of end gap on the lower ring in the cylinder on pic number 4.

Larry Hill · 03-29-2022, 07:35 AM

With the exception of one gage acting a little funny, we don’t know why, Bob Toy did a perfect job of rewiring the pink car. Everything worked the first time after we found a defective part or two.

Thanks Bob Toy

Larry Hill · 04-17-2022, 11:11 AM

We finally got to go down the track with the pink car, after a trans change, rewiring, scaling, and suspension components change. Everything worked as advertised. We are ready to go racing!

doglover44 · 04-22-2022, 11:29 PM

Awesome Larry glad Pinky is up and running smoothly ! where's your 1st race outing ?

Larry Hill · 04-23-2022, 08:37 AM

Got my gage back from Classic yesterday. I will plug it in and bolt it up, it should take less than 5 min.

We will be going to St. Louis for the Class Racer Revival next week, for the money you can't beat it. You can enter at the gate.

We get to be back on Dumbo's engine today.

Larry Hill · 05-01-2022, 10:15 AM

Parts are a problem. It took forever to get them and then a while to get to fit. My elephant engine is a little picky on what it likes.
I had time to check the correlation between the torque plates and the heads, not perfect but pretty darn close. I got the main bearing clearance variation to .0003. I'm happy with that.

Fitting rings today. That means mains are torqued, honing plates are on, and get to use my present from Santa, my Total Seal ring filer. With a little practice removing .001 from the end gap is easy and predictable.

Larry Hill · 05-05-2022, 07:14 AM

Starting on a new block for Dumbo. I have to check bunch of stuff, remove sharp edges, and remove all of those little shavings. Went to order a new stud for oil pickup mounting 14 to 15 weeks out if I’m lucky. I know I have a few hidden in some bar stock, I just have to find them.

Frank Castros · 05-05-2022, 07:36 AM

Larry,
You're living every class racers dream and I know you appreciate it.
Frank

Larry Hill · 05-05-2022, 04:31 PM

Before I have to quit it would be kool to have a pro built engine instead of my backyardagens

03-28-2022, 08:07 AM	#572
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,277 Likes: 1,635 Liked 9,453 Times in 1,956 Posts	Re: Dumbo The Flying Elephant Thanks. It looks like plenty of end gap on the lower ring in the cylinder on pic number 4. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

03-29-2022, 07:35 AM	#573
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,277 Likes: 1,635 Liked 9,453 Times in 1,956 Posts	Re: Dumbo The Flying Elephant With the exception of one gage acting a little funny, we don’t know why, Bob Toy did a perfect job of rewiring the pink car. Everything worked the first time after we found a defective part or two. Thanks Bob Toy __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-17-2022, 11:11 AM	#574
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,277 Likes: 1,635 Liked 9,453 Times in 1,956 Posts	Re: Dumbo The Flying Elephant We finally got to go down the track with the pink car, after a trans change, rewiring, scaling, and suspension components change. Everything worked as advertised. We are ready to go racing! __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-22-2022, 11:29 PM	#575
doglover44 VIP Member Join Date: Jun 2008 Location: New Carlisle OH Posts: 1,274 Likes: 3 Liked 394 Times in 181 Posts	Re: Dumbo The Flying Elephant Awesome Larry glad Pinky is up and running smoothly ! where's your 1st race outing ? __________________ Jake Biermann

04-23-2022, 08:37 AM	#576
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,277 Likes: 1,635 Liked 9,453 Times in 1,956 Posts	Re: Dumbo The Flying Elephant Got my gage back from Classic yesterday. I will plug it in and bolt it up, it should take less than 5 min. We will be going to St. Louis for the Class Racer Revival next week, for the money you can't beat it. You can enter at the gate. We get to be back on Dumbo's engine today. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

05-01-2022, 10:15 AM	#577
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,277 Likes: 1,635 Liked 9,453 Times in 1,956 Posts	Re: Dumbo The Flying Elephant Parts are a problem. It took forever to get them and then a while to get to fit. My elephant engine is a little picky on what it likes. I had time to check the correlation between the torque plates and the heads, not perfect but pretty darn close. I got the main bearing clearance variation to .0003. I'm happy with that. Fitting rings today. That means mains are torqued, honing plates are on, and get to use my present from Santa, my Total Seal ring filer. With a little practice removing .001 from the end gap is easy and predictable. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

05-05-2022, 07:14 AM	#578
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,277 Likes: 1,635 Liked 9,453 Times in 1,956 Posts	Re: Dumbo The Flying Elephant Starting on a new block for Dumbo. I have to check bunch of stuff, remove sharp edges, and remove all of those little shavings. Went to order a new stud for oil pickup mounting 14 to 15 weeks out if I’m lucky. I know I have a few hidden in some bar stock, I just have to find them. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

05-05-2022, 07:36 AM	#579
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 2,641 Likes: 2,154 Liked 2,081 Times in 769 Posts	Re: Dumbo The Flying Elephant Larry, You're living every class racers dream and I know you appreciate it. Frank

05-05-2022, 04:31 PM	#580
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,277 Likes: 1,635 Liked 9,453 Times in 1,956 Posts	Re: Dumbo The Flying Elephant Before I have to quit it would be kool to have a pro built engine instead of my backyardagens __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817