|
07-21-2009, 09:44 AM | #1 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
Racers,
Under construction is my 1990 Firebird, manual shift, tunnel ram, small block combination. Ideas/options are needed for the hood & scoop. The plan is for a forward facing scoop, as low as possible yet give sufficient room over the carbs. One valid consideration is to have the scoop mounted on the carbs, then slide a flat hood around the scoop. [like a Comp or Pro Stock set up] It will be a big help if some pics can be posted. Let me know what you have. Please send a PM for my email if you want to email pics. Thanks
__________________
Larry Woodfin 471W |
07-21-2009, 09:55 AM | #2 |
Senior Member
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 985
Likes: 0
Liked 12 Times in 9 Posts
|
Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
If this is to be a SS car, hoodscoop must be part of hood, I believe this is also the case in most comp classes. Go to autoimagery and put in super stock you can see alot of different scoop combos there. Joe
__________________
Joe Buchanan SS/BX 3117 |
07-21-2009, 11:12 AM | #3 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
no class rules, this is an association of stick racers built along the lines of Modified or Comp class cars. I am fully aware of the the web site photos but that is not enough detail.
My hope is to find a few specific examples with detail photos
__________________
Larry Woodfin 471W |
07-21-2009, 12:54 PM | #4 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
got it handled, will post photos later of the completed project
__________________
Larry Woodfin 471W |
|
|