Mallory distributor cap rotor needed

Tom Meyer · 01-27-2023, 10:25 PM

I'm looking for a new cap and rotor for my old mallory tach drive distributor. Any info and part numbers would be appreciated. Thanks Tom

Jim Hawkins · 01-28-2023, 12:01 AM

Tom, I used to run what I believe is the same dist. purchased about 1990. I did not have the adapter for the large cap with HEI terminals. The cap screwed down directly without the adapter and was smaller diameter with the old style push in terminals. At some point I could not locate a cap and rotor but somehow found that the cap for a 55-56 chevy without the window fit. That cap clipped on and would require holes drilled for the screws. I never did it but I think its the same cap otherwise.
Prob. not what you want but I thought I would offer what I found.

B/S 428 · 01-28-2023, 02:33 AM

Looks like a Mallory comp 9000, Ebay has new parts available. $39-$89 for a cap, $15 for a base. I run the same distributor on my comet 302. Brian Seaberg

Leon Rennebaum · 01-31-2023, 11:52 AM

BS428 is correct:
The cap is a Mallory P/N 29745 as shown on the link: https://www.holley.com/products/igni...rs/parts/29745
Rotors, base, and wire retainer are listed under Service Parts. (select appropriate rotor according ot rotation/ distributor P/N).

Tom Meyer · 01-31-2023, 06:20 PM

Got some of the stuff ordered, the rotor was a different animal but moroso showed one to match. Trying to retain the original 11,000 moroso cable drive Tach that came with the car in 1983. This car was one of Garley Daniels C super mods from way back. Thanks for the help Tom

01-27-2023, 10:25 PM	#1
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 900 Likes: 51 Liked 301 Times in 105 Posts	Mallory distributor cap rotor needed I'm looking for a new cap and rotor for my old mallory tach drive distributor. Any info and part numbers would be appreciated. Thanks Tom Attached Thumbnails __________________ Tom Meyer 5240 SS Stock ???

01-28-2023, 12:01 AM	#2
Jim Hawkins Member Join Date: Jan 2010 Posts: 186 Likes: 82 Liked 109 Times in 32 Posts	Re: Mallory distributor cap rotor needed Tom, I used to run what I believe is the same dist. purchased about 1990. I did not have the adapter for the large cap with HEI terminals. The cap screwed down directly without the adapter and was smaller diameter with the old style push in terminals. At some point I could not locate a cap and rotor but somehow found that the cap for a 55-56 chevy without the window fit. That cap clipped on and would require holes drilled for the screws. I never did it but I think its the same cap otherwise. Prob. not what you want but I thought I would offer what I found.

01-28-2023, 02:33 AM	#3
B/S 428 Junior Member Join Date: Jan 2011 Posts: 75 Likes: 11 Liked 107 Times in 23 Posts	Re: Mallory distributor cap rotor needed Looks like a Mallory comp 9000, Ebay has new parts available. $39-$89 for a cap, $15 for a base. I run the same distributor on my comet 302. Brian Seaberg

01-31-2023, 11:52 AM	#4
Leon Rennebaum Junior Member Join Date: Oct 2008 Location: Williamstown, NJ Posts: 31 Likes: 2 Liked 0 Times in 0 Posts	Re: Mallory distributor cap rotor needed BS428 is correct: The cap is a Mallory P/N 29745 as shown on the link: https://www.holley.com/products/igni...rs/parts/29745 Rotors, base, and wire retainer are listed under Service Parts. (select appropriate rotor according ot rotation/ distributor P/N).

01-31-2023, 06:20 PM	#5
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 900 Likes: 51 Liked 301 Times in 105 Posts	Re: Mallory distributor cap rotor needed Got some of the stuff ordered, the rotor was a different animal but moroso showed one to match. Trying to retain the original 11,000 moroso cable drive Tach that came with the car in 1983. This car was one of Garley Daniels C super mods from way back. Thanks for the help Tom __________________ Tom Meyer 5240 SS Stock ???