HOME FORUM RULES SPONSORS CONTACT
     
   
   
Go Back   CLASS RACER FORUM > Class Racer Forums > .90 Heads Up Class Racing Tech


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-29-2022, 03:30 PM   #1
reknapp52
Junior Member
 
reknapp52's Avatar
 
Join Date: Nov 2008
Location: Cascade, CO
Posts: 48
Likes: 22
Liked 7 Times in 5 Posts
Default Crane Cam F-288/4134-6

So after I blew my motor up in Phoenix, I bought a motor from a friend, and used the short block with cam installed, and replaced heads, etc. with my parts. Didn't tear down the short block to inspect it, did a quick check on the cam and found the intake centerline to be 108, which is, in my experience a pretty normal number to see for a big block Mopar. Went to Great Bend for Div. 5 event, during T-N-T found that the car was just a TURD! I withdrew from the event and brought the car back home.

I researched the cam specs online, and an intake centerline number is not given, just opening and closing numbers @ .050. When checking those numbers it appears that my cam is 12 degrees retarded, meaning that the center point of the very top of my intake lobe will be at 96 degrees. That seems crazy, I've never run a cam with the intake centerline that far advanced. Any thoughts??
reknapp52 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.