|
10-08-2017, 08:10 PM | #1 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Q-jet ID
Anyone recognize this builder?
__________________
Todd Greene |
10-08-2017, 08:30 PM | #2 |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,329
Likes: 859
Liked 6,617 Times in 1,290 Posts
|
Re: Q-jet ID
Scott Welborn from SC worked on quite a few Q jets years ago...
|
10-08-2017, 08:45 PM | #3 |
Member
Join Date: Jul 2007
Posts: 137
Likes: 0
Liked 5 Times in 4 Posts
|
Re: Q-jet ID
Your car being from D-1 I would say Joe Scott
|
10-08-2017, 08:50 PM | #4 |
Junior Member
Join Date: Mar 2008
Location: New Freedom, Pa.
Posts: 32
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Q-jet ID
Could be Joe Scott from northern Pa
|
10-08-2017, 09:25 PM | #5 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Re: Q-jet ID
Thanks guys.
__________________
Todd Greene |
10-08-2017, 09:38 PM | #6 |
Member
Join Date: Jan 2016
Location: Colorado hills
Posts: 123
Likes: 11
Liked 73 Times in 36 Posts
|
Re: Q-jet ID
Look on the bottom of the throttle plate - If a Joe Scott piece, will be vibra penciled with Scott on the bottom and also the rear (with a number). Last one I worked on was #72 (that was probably at least 30+ yrs old) and also had a brazed secondary lever so all four throttle blades opened at the same time.
Regards, Dissident |
10-08-2017, 09:56 PM | #7 | |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Re: Q-jet ID
Quote:
__________________
Todd Greene |
|
10-08-2017, 10:09 PM | #8 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Re: Q-jet ID
Also as an addendum, no the fuel system is probably not ideal (blue pump and holley regulator, deadhead) but the pressure is turned down to 5 to eliminate that as the rich condition.
__________________
Todd Greene |
|
|