|
09-02-2012, 10:03 PM | #1 |
Junior Member
Join Date: Sep 2012
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
Th350 trans brake
Hello y'all, I'm the process of installing a brake in my th350, I'm stuck at the point where you swap the high gear oem springs with the stiffer springs that come with the kit, the kit is a JW. Now my problem is trying to get the stiffer springs on the spring retainer. The oem springs had to be removed with a screwdriver. And after the removal there is a tampered edge that the new springs will not go over. Is there a trick to getting them to pop over this, or do you just disreguard it all together and set the retainer on the springs and go with it. Any help would be awesome thanks.
|
09-03-2012, 12:37 AM | #2 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,651
Likes: 2,760
Liked 4,841 Times in 1,838 Posts
|
Re: Th350 trans brake
Quote:
I suspect they were made like that for the assembly line.
__________________
Real life never quite adds up.... Jay Farrar |
|
09-03-2012, 05:03 PM | #3 |
Junior Member
Join Date: Sep 2012
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Th350 trans brake
That's what I was hoping, I didn't want to knock down any edges unless I had too. Thanks for the quick reply.
|
|
|