|
01-12-2020, 12:21 PM | #1 |
Member
Join Date: Aug 2005
Posts: 254
Likes: 196
Liked 41 Times in 15 Posts
|
Trans Yoke Roller Tail
Does anyone have or know who makes a Trans yoke for a T350 for a roller tail, with a 6.5 in from center of joint (1350) to the yoke end? Only one I can find is a Moser that's a 6in center to end.
|
01-12-2020, 01:05 PM | #2 |
Member
Join Date: Jun 2007
Location: Federal Way, WA
Posts: 233
Likes: 23
Liked 147 Times in 47 Posts
|
Re: Trans Yoke Roller Tail
I didn't go through the full list, but Sonnax has a selection of performance yokes.
https://www.sonnax.com/slip_yokes Good luck!
__________________
Brian Thompson NHRA Stock / Super Stock Class P/SA 6665 SS/MA 6665 |
01-12-2020, 02:47 PM | #3 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,433
Likes: 770
Liked 696 Times in 201 Posts
|
Re: Trans Yoke Roller Tail
Every billet 1350 yoke I've used in the last several years is 6" long , roller or bushing .
With the yoke properly engaged into the trans there should be no need for a longer one . If the driveshaft is too short and you need the extra 1/2" to get the yoke into the bearing ,you're setting yourself up for other possible issues . Besides stressing the splines ,the yoke can bind on the spline when the yoke is too far out on the shaft.
__________________
Tom Goldman 1500 SG , 1506 STK |
01-13-2020, 12:42 AM | #4 |
Member
Join Date: Oct 2009
Location: Whitecourt,Alberta,Canada
Posts: 226
Likes: 3,749
Liked 40 Times in 23 Posts
|
Re: Trans Yoke Roller Tail
Did you try Mark Williams
__________________
Bruce Cameron 68 Nova 396 E/S 68 Camaro SS/? ex Checkmate Modified |
Thread Tools | |
Display Modes | |
|
|