|
03-21-2024, 05:49 PM
|
#1 |
|
Member
Join Date: Mar 2008
Posts: 123
Likes: 0
Liked 2 Times in 2 Posts
|
minimum slick to leaf spring clearance
I am running a mickey thompson 29.5 x 9 st slick and was wondering what the minimum clearance between the slick and the leaf spring with the car sitting on the ground. thanks ron
|
|
|
|
03-21-2024, 05:52 PM
|
#2 | |
|
VIP Member
Join Date: Oct 2007
Posts: 1,097
Likes: 404
Liked 250 Times in 101 Posts
|
Re: minimum slick to leaf spring clearance
Quote:
|
|
|
|
|
|
03-21-2024, 05:57 PM
|
#3 |
|
Member
Join Date: Mar 2008
Posts: 123
Likes: 0
Liked 2 Times in 2 Posts
|
Re: minimum slick to leaf spring clearance
Bias
|
|
|
|
|
03-21-2024, 06:24 PM
|
#4 |
|
Junior Member
Join Date: Mar 2010
Posts: 84
Likes: 26
Liked 43 Times in 25 Posts
|
Re: minimum slick to leaf spring clearance
With our radials we have 3/8" clearance & have no issues with rubbing.
While it has been many years since we have run bias slicks. It seems like we had about 1/2" clearance, but also had signs of slight rubbing. I'm sure it was due to turning off at the end of the track & sidewall flex. |
|
|
|
|
03-21-2024, 07:41 PM
|
#5 |
|
Member
Join Date: Jan 2009
Location: the Brazos Valley of TX
Posts: 106
Likes: 122
Liked 88 Times in 28 Posts
|
Re: minimum slick to leaf spring clearance
Currently operating Hoosier 9x29 bias ply with about 3/8-1/2 inch clear of the leaf spring. Typically inflated to 12-15 psi on a 9 inch rim. Seems to work fine. The inboard white letters aren’t so white anymore but attribute that to minor rubbing during turns-like 1700camaro alluded to.
Last edited by T Ames; 03-22-2024 at 07:47 AM. Reason: Add specifics. |
|
|
|
|
03-21-2024, 08:36 PM
|
#6 |
|
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,122
Likes: 1,978
Liked 2,707 Times in 853 Posts
|
Re: minimum slick to leaf spring clearance
All sounds like good guidance, assume you’re running a 10 inch rim?
__________________
Jim Carter 2340 Super Stock 2340 SST/2340 Stock |
|
|
|
|
03-22-2024, 07:11 AM
|
#7 |
|
Member
Join Date: Mar 2008
Posts: 123
Likes: 0
Liked 2 Times in 2 Posts
|
Re: minimum slick to leaf spring clearance
currently running a 9" rim.
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
All times are GMT -4. The time now is 04:16 PM.