Header Retention Rule Revision - Page 9

Mack Reeves · 02-27-2014, 09:52 AM

Quote:

Originally Posted by Dan Fletcher

I think this has been the most overblown deal I've ever seen. It's not like they're saying you have to buy new ones every 2 years, it's a one time deal. Mufflers were worth fighting about, this is not, IMO.

Very well said.....

Jeff Teuton · 02-27-2014, 10:06 AM

It is a little muddy. My understanding all along was the tether itself should be minimum 1/8 SS cable, and a loop of some kind on each end secured on a primary tube and the collector with a T-Clamp (Aircraft Clamp and several other names). Or you could have used a tether with a loop on each end, the collector end secured by the T-Clamp and you could bolt the other end to the frame with a bolt thru the frame. I have sent this to NHRA thru SRAC for clarification. Sometime what they mean and what gets printed is different. There seems to be confusion on the multi piece exhaust that run all over the car like plumbing pipe which I think some Fords got.

Signman · 02-27-2014, 10:36 AM

NHRA is requiring 2 methods of retention if you headers have removable collectors. Conventional method plus one of 3 options.

Bob Bender · 02-27-2014, 11:47 AM

Mine is good !!!!

gsa612 · 02-27-2014, 12:34 PM

This is what I was going to use as a secondary option #3,but the clarification is so vague!.

buzzinhalfdozen · 02-27-2014, 03:51 PM

Dan, I don't think it's the cost of the parts (though it may be in some cases) needed that has most scratching their heads. I believe it's the apparent vagueness of the wording and the revising that has most wondering...my self included. Heck less than 100 dollars and you're sweet, but again why put it on if the NHRA is just gonna rescind it or change it again. Merely my opinion. Joe

Jeff Teuton · 02-27-2014, 04:05 PM

Per NHRA. Three methods of retention. Collector welded to primary tubes; approved tether, or hanger attached to body and collector so it can't fly off. I think all the details have already been talked about. The third option (hanger) is the newest. I think it is worded badly, but they want something bolted or attached to the body so it can't be removed very easy. I think we all knew about the welding and the tethers. I think Dan is right; it's just not that big a deal and it's once only. I am the messenger only.

Michael Beard · 03-01-2014, 09:18 AM

HandOverFist · 03-01-2014, 09:27 AM

Got casters on the bottom?

Randall Klein · 03-01-2014, 09:27 AM

Very funny, but, No.

Plumbers strap prohibited.

Of course you know that, but thanks for the chuckle, with the winter we are experiencing any laugh helps

02-27-2014, 10:06 AM	#82
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 325 Times in 50 Posts	Re: Header Retention Rule Revision It is a little muddy. My understanding all along was the tether itself should be minimum 1/8 SS cable, and a loop of some kind on each end secured on a primary tube and the collector with a T-Clamp (Aircraft Clamp and several other names). Or you could have used a tether with a loop on each end, the collector end secured by the T-Clamp and you could bolt the other end to the frame with a bolt thru the frame. I have sent this to NHRA thru SRAC for clarification. Sometime what they mean and what gets printed is different. There seems to be confusion on the multi piece exhaust that run all over the car like plumbing pipe which I think some Fords got. __________________ Jeff Teuton 4022 STK

02-27-2014, 10:36 AM	#83
Signman Senior Member Join Date: Oct 2003 Location: Lower Slower Delaware Posts: 535 Likes: 22 Liked 269 Times in 99 Posts	Re: Header Retention Rule Revision NHRA is requiring 2 methods of retention if you headers have removable collectors. Conventional method plus one of 3 options. __________________ Frank Ferrucci I/SA 1271 "Be Thankful for the Gifts You are Given"

02-27-2014, 11:47 AM	#84
Bob Bender VIP Member Join Date: Jan 2009 Location: Maryland Posts: 1,732 Likes: 1,596 Liked 459 Times in 90 Posts	Re: Header Retention Rule Revision Mine is good !!!! __________________ Bob Bender 144 O/SA 2010-2012 National Record Holder

02-27-2014, 12:34 PM	#85
gsa612 Senior Member Join Date: Jan 2008 Location: 100th Meridian Posts: 569 Likes: 116 Liked 280 Times in 139 Posts	Re: Header Retention Rule Revision This is what I was going to use as a secondary option #3,but the clarification is so vague!. Attached Thumbnails

02-27-2014, 03:51 PM	#86
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: Header Retention Rule Revision Dan, I don't think it's the cost of the parts (though it may be in some cases) needed that has most scratching their heads. I believe it's the apparent vagueness of the wording and the revising that has most wondering...my self included. Heck less than 100 dollars and you're sweet, but again why put it on if the NHRA is just gonna rescind it or change it again. Merely my opinion. Joe __________________ Joe Buchanan SS/BX 3117

02-27-2014, 04:05 PM	#87
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 325 Times in 50 Posts	Re: Header Retention Rule Revision Per NHRA. Three methods of retention. Collector welded to primary tubes; approved tether, or hanger attached to body and collector so it can't fly off. I think all the details have already been talked about. The third option (hanger) is the newest. I think it is worded badly, but they want something bolted or attached to the body so it can't be removed very easy. I think we all knew about the welding and the tethers. I think Dan is right; it's just not that big a deal and it's once only. I am the messenger only. __________________ Jeff Teuton 4022 STK

03-01-2014, 09:18 AM	#88
Michael Beard VIP Member Join Date: Sep 2002 Location: Columbus, OH Posts: 4,060 Likes: 0 Liked 13 Times in 9 Posts	Re: Header Retention Rule Revision __________________ Michael Beard - NHRA/IHRA 3216 S/SS Last edited by Michael Beard; 03-01-2014 at 09:35 AM.

03-01-2014, 09:27 AM	#89
HandOverFist VIP Member Join Date: Oct 2013 Location: Gulf Breeze, FL Posts: 1,651 Likes: 8 Liked 33 Times in 16 Posts	Re: Header Retention Rule Revision Got casters on the bottom? __________________ Rich Taylor I/SA - 321

03-01-2014, 09:27 AM	#90
Randall Klein Senior Member Join Date: Dec 2002 Location: Lincoln, Nebraska Posts: 785 Likes: 45 Liked 316 Times in 67 Posts	Re: Header Retention Rule Revision Very funny, but, No. Plumbers strap prohibited. Of course you know that, but thanks for the chuckle, with the winter we are experiencing any laugh helps