283,327,305,307,blocks and cranks,heads - Page 2

cec-55 · 11-01-2010, 11:20 AM

Quote:

Originally Posted by Terry Cain

That should be a 283 block.
"L" means December and the "7" means 1957
so that should be a 1958 283 block.

it is standard 265 bore , it was a pick up engine and they used the same block for 265's just bored to 265 not 283, we have sonic tested it and it will bore to 283 just fine !

cec-55 · 11-01-2010, 11:34 AM

Quote:

Originally Posted by Robert Simpson

What are you asking for the 441's and 461x's? Thank You.

dont have any 461x's left, but still have some 441's $250.00 per set,

Ron Steiner · 11-01-2010, 01:36 PM

I am looking for a block & 997 heads so I can run a 245hp 2X4 in my '57 handyman wagon in stock.

cec-55 · 11-01-2010, 02:58 PM

I dont have any 997's left, but the block would work great for you ! I do have a set of 520 T heads , can you use them ?

Ron Steiner · 11-02-2010, 02:07 PM

What combination where the 520 T heads used on?

cec-55 · 11-04-2010, 11:22 AM

Quote:

Originally Posted by Ron Steiner

What combination where the 520 T heads used on?

nhra list them for all combos that year , good heads

Greg Hill · 11-06-2010, 11:14 AM

I'm looking for a good set of 186's or 462's that haven't had a valve job done on them or anything else. Will be used on stock eliminator motor.

Terry Cain · 11-06-2010, 05:09 PM

Hey Greg,
Give me a call. Calton or Buddy have my number.

cec-55 · 11-08-2010, 04:42 PM

the only 462, 186's i have lefthave had very mild port work done ,
sorry !

11-01-2010, 01:36 PM	#13
Ron Steiner Junior Member Join Date: Jun 2007 Posts: 44 Likes: 0 Liked 0 Times in 0 Posts	Re: 283,327,305,307,blocks and cranks,heads I am looking for a block & 997 heads so I can run a 245hp 2X4 in my '57 handyman wagon in stock.

11-01-2010, 02:58 PM	#14
cec-55 Junior Member Join Date: Oct 2010 Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	Re: 283,327,305,307,blocks and cranks,heads I dont have any 997's left, but the block would work great for you ! I do have a set of 520 T heads , can you use them ?

11-02-2010, 02:07 PM	#15
Ron Steiner Junior Member Join Date: Jun 2007 Posts: 44 Likes: 0 Liked 0 Times in 0 Posts	Re: 283,327,305,307,blocks and cranks,heads What combination where the 520 T heads used on?

11-06-2010, 11:14 AM	#17
Greg Hill VIP Member Join Date: May 2006 Location: Louisville , KY Posts: 1,995 Likes: 69 Liked 279 Times in 68 Posts	Re: 283,327,305,307,blocks and cranks,heads I'm looking for a good set of 186's or 462's that haven't had a valve job done on them or anything else. Will be used on stock eliminator motor. __________________ Greg Hill 4171 STK

11-06-2010, 05:09 PM	#18
Terry Cain Senior Member Join Date: Feb 2008 Location: Georgetown, Indiana (close to Louisville, KY) Posts: 778 Likes: 530 Liked 231 Times in 107 Posts	Re: 283,327,305,307,blocks and cranks,heads Hey Greg, Give me a call. Calton or Buddy have my number. __________________ Terry Cain ???? STK tcain19689585@gmail.com

11-08-2010, 04:42 PM	#19
cec-55 Junior Member Join Date: Oct 2010 Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	Re: 283,327,305,307,blocks and cranks,heads the only 462, 186's i have lefthave had very mild port work done , sorry !