Ppp shifter clean and relube?

[1700camaro]

When I get my car back from the body & paint shop. I'm inspecting the shifter, among many other things. If it needs cleaning & lube, it will get it.

I'm pretty sure

Mr. Keyboard KAREN 1320

will be along shortly!

[1320racer]

Paul, I do get exactly what I deserve, I worked for it, life is GREAT!

That said, my comments stand about your ridiculous thread asking about lube for a shifter mechanism.

[Signman]

Originally Posted by 1320racer

Wrong, I've made thousands of 2-3 shifts with my Turbo Action shifter in the Firebird without issues!

May not apply to you but did so for me and others
You're special though!

[1320racer]

not special, just have motor skills and hand eye coordination to manually shift a 3 speed trans that you obviously don't.

[Jeff Stout]

Originally Posted by 1320racer

not special, just have motor skills and hand eye coordination to manually shift a 3 speed trans that you obviously don't.

Foot brake that dragster? Not able to hit a tree even if it fell on you.

[Signman]

Originally Posted by 1320racer

not special, just have motor skills and hand eye coordination to manually shift a 3 speed trans that you obviously don't.

LOL! You are very special...... Ground Strap....

[Signman]

Originally Posted by Signman

My PPP shifter has been acting up on the 1-2 shift going past 2nd so disassembled it either it needed maintenance or was worn out


The original lube was full of dirt cleaned it all off everywhere

Don't mess with the handle unless you have some patience.
Used Super Lube silicon grease as the assembly lube
Soaked the cable in trans fluid for a few days
Re installed making sure alignment and adjustment are as instructed.


Initially my impression was the spring that pushed the rod/disc up needed to slow down but with bench testing and in the car before and after the shift lever needed to speed up. That must be why PPP states most problems are in the cable.

Cleaning and lubrication worked as expected.
No more shifter issue.

[tuffxf]

Originally Posted by Signman

Cleaning and lubrication worked as expected.
No more shifter issue.

Mine turned out great also!
Cheers