|
05-07-2021, 09:19 PM | #1 |
Member
Join Date: Mar 2008
Posts: 128
Likes: 0
Liked 3 Times in 3 Posts
|
front engine dragster fire suit question
what is the nhra required suit for a naturally asperated front engine dragster running 8.50? i dont have a rule book handy. thanks
|
05-08-2021, 12:48 PM | #2 |
Senior Member
Join Date: Sep 2016
Posts: 862
Likes: 170
Liked 293 Times in 162 Posts
|
Re: front engine dragster fire suit question
Assuming your trans has a covering, you need jacket and pants Spec. 3.2A/5 and gloves 3.3/1 plus arm restraints. I would double check on this with your Div. director.
|
05-08-2021, 01:42 PM | #3 |
Member
Join Date: Mar 2008
Posts: 128
Likes: 0
Liked 3 Times in 3 Posts
|
Re: front engine dragster fire suit question
|
05-08-2021, 01:53 PM | #4 |
VIP Member
Join Date: Jun 2006
Posts: 3,378
Likes: 426
Liked 304 Times in 163 Posts
|
Re: front engine dragster fire suit question
ALSO plus neck collar---plus full face helmet WITH face shield--thats for gasoline cars ---you use alcohol or E-85 gas different et of rules--- PLUS you better check all of the previous information again because of the FRONT engine part --- not sure of the trans shield part because it depends on if the trans is in the drivers compartment or not !!!! FED 387
Last edited by FED 387; 05-08-2021 at 01:56 PM. Reason: add info |
11-05-2021, 01:21 PM | #5 |
Senior Member
Join Date: Jan 2005
Location: Alpine, NJ
Posts: 564
Likes: 184
Liked 185 Times in 81 Posts
|
Re: front engine dragster fire suit question
I'd want a floor in it for sure.. and I'd be using a Dedenbear or Reid transmission case, as it is between your legs.. if it's certified for 8.50, you probably will not be going 180mph, and will not require a 15 suit, so a 5 suit is OK, unless you feel you want more protection.. don't cheap out on the full face helmet, and consider a HANS device..
How old is the chassis??.. make sure the front end is good, and the length is good for your power.. most front engine cars are short, like 200" to 225".. make sure the chassis cert is current, or you may need a chassis shop to do upgrades.. |
05-19-2024, 11:31 AM | #6 |
Junior Member
Join Date: Apr 2014
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
Re: front engine dragster fire suit question
I think most front engine cars like FED have lot stronger reuirement. I know Jr,fuel cars require sfi 20 suit. SBC with alcohol for most part. I have a 20 suyit and it is PIA but then so is being burnt. I can not remebr seeing a alcohol injected car having huge fire, but I can see where front end hitting wall with fuel tank full of alcohol could be problem.
I have thought about lower nsfi suit for comfort, but always talk myself out of it. Why go with minimum when its your ***** on the line? |
|
|