360 Duster Stocker Oil Pan ?

Rick J · 02-06-2024, 08:48 PM

Are the 360 Duster stockers running a Dakota type oil pan like the 340 Duster stockers are?

Is there a particular year Dakota pan & pickup that is preferred for the 360?

Thanks

Tom Young · 02-06-2024, 10:10 PM

Look for a Dakota pan for a pre-1992 360. I got one for my 360 from Chrysler new, but there was only a few left in the country about 2 years ago.. I bought a second one from Rock Auto about a year or so ago for like $60. Try there.

Rick J · 02-06-2024, 11:16 PM

Thanks for the quick reply

The earliest Dakota pan & pickup I see Rock Auto has is 1998, will those work?

Coleydog · 02-06-2024, 11:31 PM

I’m using the Magnum pan, mid 90s, rear sump

jmcarter · 02-07-2024, 07:47 AM

Try Bruce Parsons (Hi Performance Engine Service in Dayton), he knows exactly which one you need and may even have one.

Coleydog · 02-07-2024, 04:25 PM

I send a pic if I knew how

Gmirza · 02-07-2024, 09:48 PM

On a 360 with the small radius rear cap any 1991 and up Dakota 318 or 360 pan will fit. It’s the pre 91 318 pans for the large radius rear cap that fit the 340 and pre 91 318’s that are almost non existent. If in doubt buy a pan gasket for the year pan your looking at and see if it’s right for your engine.
Just a heads up, the engine won’t fit back in after you put one of these pans on. It takes some creative engineering to make it work. I’ve seen it done several ways but it takes some work.

02-06-2024, 08:48 PM	#1
Rick J Junior Member Join Date: Jul 2022 Posts: 72 Likes: 23 Liked 58 Times in 26 Posts	360 Duster Stocker Oil Pan ? Are the 360 Duster stockers running a Dakota type oil pan like the 340 Duster stockers are? Is there a particular year Dakota pan & pickup that is preferred for the 360? Thanks Last edited by Rick J; 02-07-2024 at 06:49 AM.

02-06-2024, 10:10 PM	#2
Tom Young Junior Member Join Date: Oct 2009 Location: Baltimore, Maryland Posts: 55 Likes: 1 Liked 16 Times in 8 Posts	Re: 360 Duster Stocker Oil Pan ? Look for a Dakota pan for a pre-1992 360. I got one for my 360 from Chrysler new, but there was only a few left in the country about 2 years ago.. I bought a second one from Rock Auto about a year or so ago for like $60. Try there.

02-06-2024, 11:16 PM	#3
Rick J Junior Member Join Date: Jul 2022 Posts: 72 Likes: 23 Liked 58 Times in 26 Posts	Re: 360 Duster Stocker Oil Pan ? Thanks for the quick reply The earliest Dakota pan & pickup I see Rock Auto has is 1998, will those work? Last edited by Rick J; 02-07-2024 at 06:49 AM.

02-06-2024, 11:31 PM	#4
Coleydog Senior Member Join Date: Jul 2014 Posts: 569 Likes: 36 Liked 50 Times in 35 Posts	Re: 360 Duster Stocker Oil Pan ? I’m using the Magnum pan, mid 90s, rear sump

02-07-2024, 07:47 AM	#5
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,223 Likes: 2,176 Liked 2,966 Times in 913 Posts	Re: 360 Duster Stocker Oil Pan ? Try Bruce Parsons (Hi Performance Engine Service in Dayton), he knows exactly which one you need and may even have one. __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

02-07-2024, 04:25 PM	#6
Coleydog Senior Member Join Date: Jul 2014 Posts: 569 Likes: 36 Liked 50 Times in 35 Posts	Re: 360 Duster Stocker Oil Pan ? I send a pic if I knew how

02-07-2024, 09:48 PM	#7
Gmirza Member Join Date: Dec 2018 Location: Massachusetts Posts: 169 Likes: 189 Liked 245 Times in 90 Posts	Re: 360 Duster Stocker Oil Pan ? On a 360 with the small radius rear cap any 1991 and up Dakota 318 or 360 pan will fit. It’s the pre 91 318 pans for the large radius rear cap that fit the 340 and pre 91 318’s that are almost non existent. If in doubt buy a pan gasket for the year pan your looking at and see if it’s right for your engine. Just a heads up, the engine won’t fit back in after you put one of these pans on. It takes some creative engineering to make it work. I’ve seen it done several ways but it takes some work. __________________ George Mirza D/SA 1236 ‘71 Duster 340